ASTM Standards

• ASTM A1 – 00(2010) Standard Specification for Carbon Steel Tee Rails
• ASTM A2 – 02(2008) Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
• ASTM A3 – 01(2012) Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
• ASTM A6/A6M – 13 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
• ASTM A20/A20M – 11 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
• ASTM A27/A27M – 10 Standard Specification for Steel Castings, Carbon, for General Application
• ASTM A29/A29M – 12 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
• ASTM A31 – 04(2009) Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
• ASTM A34/A34M – 06(2012) Standard Practice for Sampling and Procurement Testing of Magnetic Materials
• ASTM A36/A36M – 12 Standard Specification for Carbon Structural Steel
• ASTM A36/A36M-SP – 12 Especificación Normalizada para Acero al Carbono Estructural
• ASTM A47/A47M – 99(2009) Standard Specification for Ferritic Malleable Iron Castings
• ASTM A48/A48M – 03(2012) Standard Specification for Gray Iron Castings
• ASTM A49 – 12 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
• ASTM A53/A53M – 12 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
• ASTM A53/A53M-SP – 12 Especificación Normalizada para Tubos de Acero Negro e Inmersos en Caliente, Galvanizados, Soldados y Sin Costura
• ASTM A65 – 07(2013) Standard Specification for Steel Track Spikes
• ASTM A66 – 07(2013) Standard Specification for Steel Screw Spikes
• ASTM A67 – 00(2010) Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
• ASTM A74 – 13 Standard Specification for Cast Iron Soil Pipe and Fittings
• ASTM A82/A82M – 07 Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
• ASTM A82/A82M-SP – 07 Especificación Normalizada para Alambre de Acero, Liso, para Refuerzo de Concreto
• ASTM A90/A90M – 13 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
• ASTM A99 – 03(2009) Standard Specification for Ferromanganese
• ASTM A100 – 07(2012) Standard Specification for Ferrosilicon
• ASTM A101 – 04(2009) Standard Specification for Ferrochromium
• ASTM A102 – 04(2009) Standard Specification for Ferrovanadium
• ASTM A105/A105M – 12 Standard Specification for Carbon Steel Forgings for Piping Applications
• ASTM A106/A106M – 11 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
• ASTM A108 – 07 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
• ASTM A109/A109M – 08 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
• ASTM A111 – 99a(2009) Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire
• ASTM A116 – 11 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
• ASTM A121 – 13 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
• ASTM A123/A123M – 12 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
• ASTM A125 – 96(2007) Standard Specification for Steel Springs, Helical, Heat-Treated
• ASTM A126 – 04(2009) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
• ASTM A128/A128M – 93(2012) Standard Specification for Steel Castings, Austenitic Manganese
• ASTM A131/A131M – 08 Standard Specification for Structural Steel for Ships
• ASTM A132 – 04(2009) Standard Specification for Ferromolybdenum
• ASTM A134 – 96(2012) Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
• ASTM A135/A135M – 09 Standard Specification for Electric-Resistance-Welded Steel Pipe
• ASTM A139/A139M – 04(2010) Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
• ASTM A143/A143M – 07 Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
• ASTM A144 – 04(2009) Specification for Ferrotungsten
• ASTM A146 – 04(2009) Standard Specification for Molybdenum Oxide Products
• ASTM A148/A148M – 08 Standard Specification for Steel Castings, High Strength, for Structural Purposes
• ASTM A153/A153M – 09 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
• ASTM A159 – 83(2011) Standard Specification for Automotive Gray Iron Castings
• ASTM A167 – 99(2009) Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
• ASTM A176 – 99(2009) Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
• ASTM A178/A178M – 02(2012) Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
• ASTM A179/A179M – 90a(2012) Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
• ASTM A181/A181M – 12 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
• ASTM A182/A182M – 13 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
• ASTM A183 – 03(2009) Standard Specification for Carbon Steel Track Bolts and Nuts
• ASTM A184/A184M – 06(2011) Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
• ASTM A185/A185M – 07 Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
• ASTM A192/A192M – 02(2012) Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
• ASTM A193/A193M – 12b Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
• ASTM A194/A194M – 12a Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
• ASTM A197/A197M – 00(2011) Standard Specification for Cupola Malleable Iron
• ASTM A203/A203M – 12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
• ASTM A204/A204M – 12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
• ASTM A209/A209M – 03(2012) Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
• ASTM A210/A210M – 02(2012) Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
• ASTM A213/A213M – 13 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
• ASTM A214/A214M – 96(2012) Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
• ASTM A216/A216M – 12 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
• ASTM A217/A217M – 12 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
• ASTM A220/A220M – 99(2009) Standard Specification for Pearlitic Malleable Iron
• ASTM A225/A225M – 12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
• ASTM A227/A227M – 06(2011) Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
• ASTM A228/A228M – 07 Standard Specification for Steel Wire, Music Spring Quality
• ASTM A229/A229M – 12 Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
• ASTM A230/A230M – 05(2011)e1 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
• ASTM A231/A231M – 10 Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
• ASTM A232/A232M – 05(2011)e1 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
• ASTM A234/A234M – 11a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
• ASTM A239 – 95(2009)e1 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
• ASTM A240/A240M – 13a Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
• ASTM A242/A242M – 04(2009) Standard Specification for High-Strength Low-Alloy Structural Steel
• ASTM A247 – 10 Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
• ASTM A249/A249M – 10a Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
• ASTM A250/A250M – 05(2009) Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
• ASTM A252 – 10 Standard Specification for Welded and Seamless Steel Pipe Piles
• ASTM A254/A254M – 12 Standard Specification for Copper-Brazed Steel Tubing
• ASTM A255 – 10 Standard Test Methods for Determining Hardenability of Steel
• ASTM A262 – 13 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
• ASTM A263 – 12 Standard Specification for Stainless Chromium Steel-Clad Plate
• ASTM A264 – 12 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate
• ASTM A265 – 12 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
• ASTM A266/A266M – 11 Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
• ASTM A268/A268M – 10 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
• ASTM A269 – 10 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
• ASTM A270/A270M – 10 Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
• ASTM A275/A275M – 08(2013) Standard Practice for Magnetic Particle Examination of Steel Forgings
• ASTM A276 – 13 Standard Specification for Stainless Steel Bars and Shapes
• ASTM A278/A278M – 01(2011) Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
• ASTM A283/A283M – 12a Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
• ASTM A285/A285M – 12 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
• ASTM A288 – 91(2013) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
• ASTM A289/A289M – 97(2013) Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
• ASTM A290/A290M – 05(2010) Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
• ASTM A291/A291M – 05(2010) Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
• ASTM A295/A295M – 09 Standard Specification for High-Carbon Anti-Friction Bearing Steel
• ASTM A297/A297M – 10 Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
• ASTM A299/A299M – 09 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
• ASTM A302/A302M – 12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
• ASTM A304 – 11 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
• ASTM A307 – 12 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60?000 PSI Tensile Strength
• ASTM A308/A308M – 10 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
• ASTM A309 – 01(2012) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
• ASTM A311/A311M – 04(2010) Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
• ASTM A312/A312M – 13 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
• ASTM A313/A313M – 10e1 Standard Specification for Stainless Steel Spring Wire
• ASTM A314 – 13 Standard Specification for Stainless Steel Billets and Bars for Forging
• ASTM A319 – 71(2011) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
• ASTM A320/A320M – 11a Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
• ASTM A322 – 13 Standard Specification for Steel Bars, Alloy, Standard Grades
• ASTM A323 – 05(2010) Standard Specification for Ferroboron
• ASTM A324 – 08(2013) Standard Specification for Ferrotitanium
• ASTM A325 – 10 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
• ASTM A325M – 13 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)
• ASTM A327/A327M – 11 Standard Test Methods for Impact Testing of Cast Irons
• ASTM A328/A328M – 07(2012) Standard Specification for Steel Sheet Piling
• ASTM A333/A333M – 11 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
• ASTM A334/A334M – 04a(2010) Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
• ASTM A335/A335M – 11 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
• ASTM A336/A336M – 10a Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
• ASTM A338 – 84(2009) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
• ASTM A340 – 03a(2011) Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
• ASTM A341/A341M – 00(2011)e1 Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods
• ASTM A342/A342M – 04(2012) Standard Test Methods for Permeability of Feebly Magnetic Materials
• ASTM A343/A343M – 03(2008) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
• ASTM A345 – 09 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
• ASTM A348/A348M – 05(2011) Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
• ASTM A350/A350M – 12 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
• ASTM A351/A351M – 13 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
• ASTM A352/A352M – 06(2012) Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
• ASTM A353/A353M – 09 Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel
• ASTM A354 – 11 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
• ASTM A355 – 89(2012) Standard Specification for Steel Bars, Alloys, for Nitriding
• ASTM A356/A356M – 11 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
• ASTM A358/A358M – 12 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
• ASTM A363 – 03(2009)e1 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
• ASTM A367 – 11 Standard Test Methods of Chill Testing of Cast Iron
• ASTM A368 – 95a(2009) Standard Specification for Stainless Steel Wire Strand
• ASTM A369/A369M – 11 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
• ASTM A370 – 12a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
• ASTM A372/A372M – 12 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
• ASTM A376/A376M – 13 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
• ASTM A377 – 03(2008)e1 Standard Index of Specifications for Ductile-Iron Pressure Pipe
• ASTM A380/A380M – 13 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
• ASTM A381 – 96(2012) Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
• ASTM A384/A384M – 07(2013) Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
• ASTM A385/A385M – 11 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
• ASTM A387/A387M – 11 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
• ASTM A388/A388M – 11 Standard Practice for Ultrasonic Examination of Steel Forgings
• ASTM A389/A389M – 10 Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
• ASTM A390 – 06(2011) Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
• ASTM A391/A391M – 07(2012) Standard Specification for Grade 80 Alloy Steel Chain
• ASTM A392 – 11a Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
• ASTM A394 – 08e1 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
• ASTM A395/A395M – 99(2009) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
• ASTM A400 – 69(2012) Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
• ASTM A401/A401M – 10 Standard Specification for Steel Wire, Chromium-Silicon Alloy
• ASTM A403/A403M – 12 Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
• ASTM A407 – 07(2013) Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
• ASTM A409/A409M – 09 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
• ASTM A411 – 08(2013) Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
• ASTM A413/A413M – 07(2012) Standard Specification for Carbon Steel Chain
• ASTM A414/A414M – 10 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
• ASTM A416/A416M – 12a Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
• ASTM A418/A418M – 10 Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
• ASTM A420/A420M – 10a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
• ASTM A421/A421M – 10 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
• ASTM A421/A421M-SP – 10 Alambre de Acero Aliviado de Esfuerzos sin Recubrimiento para Concreto Preesforzado
• ASTM A423/A423M – 09 Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
• ASTM A424/A424M – 09a Standard Specification for Steel, Sheet, for Porcelain Enameling
• ASTM A426/A426M – 11a Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
• ASTM A427/A427M – 10 Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
• ASTM A428/A428M – 10 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
• ASTM A434 – 06(2012) Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
• ASTM A435/A435M – 90(2012) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
• ASTM A436 – 84(2011) Standard Specification for Austenitic Gray Iron Castings
• ASTM A437/A437M – 12 Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
• ASTM A439 – 83(2009) Standard Specification for Austenitic Ductile Iron Castings
• ASTM A447/A447M – 11 Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
• ASTM A449 – 10 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
• ASTM A450/A450M – 10 Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
• ASTM A451/A451M – 06(2010) Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
• ASTM A453/A453M – 12 Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
• ASTM A455/A455M – 12a Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
• ASTM A456/A456M – 08(2013) Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
• ASTM A459 – 08(2013) Standard Specification for Zinc-Coated Flat Steel Armoring Tape
• ASTM A460 – 11 Standard Specification for Copper-Clad Steel Wire Strand
• ASTM A463/A463M – 10 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
• ASTM A466/A466M – 07(2012) Standard Specification for Weldless Chain
• ASTM A467/A467M – 07(2012) Standard Specification for Machine and Coil Chain
• ASTM A469/A469M – 07(2012) Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
• ASTM A470/A470M – 05(2010) Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
• ASTM A471/A471M – 09 Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
• ASTM A472/A472M – 07(2012) Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings
• ASTM A473 – 01(2009) Standard Specification for Stainless Steel Forgings
• ASTM A474 – 03(2013) Standard Specification for Aluminum-Coated Steel Wire Strand
• ASTM A475 – 03(2009)e1 Standard Specification for Zinc-Coated Steel Wire Strand
• ASTM A476/A476M – 00(2009) Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
• ASTM A478 – 97(2008) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
• ASTM A479/A479M – 13a Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
• ASTM A480/A480M – 13 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
• ASTM A481 – 05(2010) Standard Specification for Chromium Metal
• ASTM A482/A482M – 11 Standard Specification for Ferrochrome-Silicon
• ASTM A483/A483M – 10 Standard Specification for Silicomanganese
• ASTM A484/A484M – 13a Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
• ASTM A485 – 09 Standard Specification for High Hardenability Antifriction Bearing Steel
• ASTM A487/A487M – 93(2012) Standard Specification for Steel Castings Suitable for Pressure Service
• ASTM A488/A488M – 12 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
• ASTM A489 – 12 Standard Specification for Carbon Steel Lifting Eyes
• ASTM A490 – 12 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
• ASTM A490M – 12 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
• ASTM A491 – 11 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
• ASTM A492 – 95(2009) Standard Specification for Stainless Steel Rope Wire
• ASTM A493 – 09 Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
• ASTM A494/A494M – 13 Standard Specification for Castings, Nickel and Nickel Alloy
• ASTM A495 – 06(2010) Standard Specification for Calcium-Silicon Alloys
• ASTM A496/A496M – 07 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
• ASTM A497/A497M – 07 Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
• ASTM A497/A497M-SP – 07 Especificación Normalizada para Refuerzo Electrosoldado de Alambre de Acero, Corrugado, para Concreto
• ASTM A498 – 06 Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
• ASTM A499 – 89(2008) Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
• ASTM A500/A500M – 10a Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
• ASTM A500/A500M-SP – 10a Especificación Normalizada para Tubos Estructurales de Acero al Carbono Conformados en Frío, Electrosoldados y sin Costura, de forma Circular y no Circular
• ASTM A501 – 07 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
• ASTM A501-SP – 07 Especificación Normalizada para Tubos Estructurales de Acero al Carbono Conformados en Caliente, Electrosoldados y sin Costura
• ASTM A502 – 03(2009) Standard Specification for Rivets, Steel, Structural
• ASTM A503/A503M – 01(2011) Standard Specification for Ultrasonic Examination of Forged Crankshafts
• ASTM A504/A504M – 08(2013) Standard Specification for Wrought Carbon Steel Wheels
• ASTM A505 – 12 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
• ASTM A506 – 12 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
• ASTM A507 – 12 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
• ASTM A508/A508M – 05b(2010) Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
• ASTM A510/A510M – 13 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
• ASTM A511/A511M – 12 Standard Specification for Seamless Stainless Steel Mechanical Tubing
• ASTM A512 – 06(2012) Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
• ASTM A513/A513M – 12 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
• ASTM A514/A514M – 05(2009) Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
• ASTM A515/A515M – 10 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
• ASTM A516/A516M – 10 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
• ASTM A517/A517M – 10 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
• ASTM A518/A518M – 99(2012) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
• ASTM A519 – 06(2012) Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
• ASTM A521/A521M – 06(2011) Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
• ASTM A522/A522M – 11 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
• ASTM A523 – 96(2012) Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
• ASTM A524 – 96(2012) Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
• ASTM A529/A529M – 05(2009) Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
• ASTM A530/A530M – 12 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
• ASTM A531/A531M – 13 Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
• ASTM A532/A532M – 10 Standard Specification for Abrasion-Resistant Cast Irons
• ASTM A533/A533M – 09e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
• ASTM A534 – 09 Standard Specification for Carburizing Steels for Anti-Friction Bearings
• ASTM A536 – 84(2009) Standard Specification for Ductile Iron Castings
• ASTM A537/A537M – 08 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
• ASTM A540/A540M – 11 Standard Specification for Alloy-Steel Bolting for Special Applications
• ASTM A541/A541M – 05(2010) Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
• ASTM A542/A542M – 09 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
• ASTM A543/A543M – 09 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
• ASTM A550 – 06(2010) Standard Specification for Ferrocolumbium
• ASTM A551/A551M – 08(2013) Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications
• ASTM A553/A553M – 10 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
• ASTM A554 – 13 Standard Specification for Welded Stainless Steel Mechanical Tubing
• ASTM A555/A555M – 05(2009) Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
• ASTM A556/A556M – 96(2012) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
• ASTM A560/A560M – 12 Standard Specification for Castings, Chromium-Nickel Alloy
• ASTM A561 – 08 Standard Practice for Macroetch Testing of Tool Steel Bars
• ASTM A562/A562M – 10 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
• ASTM A563 – 07a Standard Specification for Carbon and Alloy Steel Nuts
• ASTM A563M – 07 Standard Specification for Carbon and Alloy Steel Nuts [Metric]
• ASTM A564/A564M – 10 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
• ASTM A565/A565M – 10 Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
• ASTM A568/A568M – 13 Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
• ASTM A571/A571M – 01(2011) Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
• ASTM A572/A572M – 12a Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
• ASTM A573/A573M – 05(2009) Standard Specification for Structural Carbon Steel Plates of Improved Toughness
• ASTM A574M – 12 Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)
• ASTM A574 – 13 Standard Specification for Alloy Steel Socket-Head Cap Screws
• ASTM A575 – 96(2007) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
• ASTM A576 – 90b(2012) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
• ASTM A577/A577M – 90(2012) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
• ASTM A578/A578M – 07(2012) Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
• ASTM A579/A579M – 04a(2009) Standard Specification for Superstrength Alloy Steel Forgings
• ASTM A580/A580M – 13 Standard Specification for Stainless Steel Wire
• ASTM A581/A581M – 95b(2009) Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
• ASTM A582/A582M – 12e1 Standard Specification for Free-Machining Stainless Steel Bars
• ASTM A586 – 04a(2009)e1 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
• ASTM A587 – 96(2012) Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
• ASTM A588/A588M – 10 Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
• ASTM A588/A588M-SP – 10 Especificación Normalizada para Acero Estructural de Alta Resistencia y Baja Aleación, con Punto Mínimo de Fluencia de hasta 50 ksi [345 MPa], con Resistencia a la Corrosión Atmosférica
• ASTM A589/A589M – 06(2012) Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
• ASTM A592/A592M – 10 Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels
• ASTM A595/A595M – 11 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
• ASTM A596/A596M – 95(2009)e1 Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
• ASTM A597 – 87(2010) Standard Specification for Cast Tool Steel
• ASTM A598/A598M – 02(2007) Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
• ASTM A599/A599M – 07(2012) Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
• ASTM A600 – 92a(2010) Standard Specification for Tool Steel High Speed
• ASTM A601/A601M – 10 Standard Specification for Electrolytic Manganese Metal
• ASTM A602 – 94(2009) Standard Specification for Automotive Malleable Iron Castings
• ASTM A603 – 98(2009)e1 Standard Specification for Zinc-Coated Steel Structural Wire Rope
• ASTM A604/A604M – 07(2012) Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
• ASTM A606/A606M – 09a Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
• ASTM A608/A608M – 12 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
• ASTM A609/A609M – 12 Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
• ASTM A610 – 79(2009) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
• ASTM A612/A612M – 12 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
• ASTM A615/A615M – 12 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
• ASTM A615/A615M-SP – 12 Especificación Normalizada para Barras de Acero al Carbono Lisas y Corrugadas para Refuerzo de Concreto
• ASTM A618/A618M – 04(2010) Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
• ASTM A623 – 11 Standard Specification for Tin Mill Products, General Requirements
• ASTM A623M – 11 Standard Specification for Tin Mill Products, General Requirements [Metric]
• ASTM A624/A624M – 03(2008)e1 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
• ASTM A625/A625M – 08 Standard Specification for Tin Mill Products, Black Plate, Single-Reduced
• ASTM A626/A626M – 03(2008)e1 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
• ASTM A627 – 03(2011) Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
• ASTM A630 – 03(2009) Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
• ASTM A632 – 04(2009) Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
• ASTM A633/A633M – 01(2011) Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
• ASTM A635/A635M – 09b Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
• ASTM A636 – 08(2013) Standard Specification for Nickel Oxide Sinter
• ASTM A638/A638M – 10 Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
• ASTM A640 – 97(2009)e1 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
• ASTM A641/A641M – 09a Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
• ASTM A644 – 13 Standard Terminology Relating to Iron Castings
• ASTM A645/A645M – 10 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
• ASTM A646/A646M – 06(2011) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
• ASTM A648 – 12 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
• ASTM A649/A649M – 10 Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
• ASTM A650/A650M – 03(2008) Standard Specification for Tin Mill Products, Black Plate, Double Reduced
• ASTM A653/A653M – 11 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
• ASTM A656/A656M – 12ae1 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
• ASTM A657/A657M – 03(2008)e1 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
• ASTM A659/A659M – 12 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
• ASTM A660/A660M – 11 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
• ASTM A662/A662M – 12 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
• ASTM A663/A663M – 12 Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
• ASTM A664 – 11 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
• ASTM A666 – 10 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
• ASTM A667/A667M – 87(2012) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
• ASTM A668/A668M – 04(2009) Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
• ASTM A671/A671M – 10 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
• ASTM A672/A672M – 09 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
• ASTM A673/A673M – 07(2012) Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
• ASTM A674 – 10 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
• ASTM A675/A675M – 03(2009) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
• ASTM A677 – 12 Standard Specification for Nonoriented Electrical Steel Fully Processed Types
• ASTM A679/A679M – 06(2012) Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
• ASTM A681 – 08 Standard Specification for Tool Steels Alloy
• ASTM A683 – 05(2010) Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
• ASTM A684/A684M – 12 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
• ASTM A686 – 92(2010) Standard Specification for Tool Steel, Carbon
• ASTM A688/A688M – 12 Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
• ASTM A689 – 97(2007)e1 Standard Specification for Carbon and Alloy Steel Bars for Springs
• ASTM A690/A690M – 07(2012) Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
• ASTM A691/A691M – 09 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
• ASTM A693 – 06 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
• ASTM A694/A694M – 08 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
• ASTM A696 – 90a(2012) Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
• ASTM A697/A697M – 03(2008) Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
• ASTM A698/A698M – 07 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
• ASTM A700 – 05 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment
• ASTM A701/A701M – 10 Standard Specification for Ferromanganese-Silicon
• ASTM A702 – 89(2006) Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
• ASTM A703/A703M – 13 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
• ASTM A704/A704M – 06(2011) Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
• ASTM A705/A705M – 95(2009) Standard Specification for Age-Hardening Stainless Steel Forgings
• ASTM A706/A706M – 09b Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
• ASTM A706/A706M-SP – 09b Especificación Normalizada para Barras de Acero de Baja Aleación Lisas y Corrugadas para Refuerzo de Concreto
• ASTM A707/A707M – 10 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
• ASTM A709/A709M – 13 Standard Specification for Structural Steel for Bridges
• ASTM A710/A710M – 02(2007) Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
• ASTM A711/A711M – 07(2012) Standard Specification for Steel Forging Stock
• ASTM A712 – 07 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
• ASTM A713 – 04(2010) Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
• ASTM A714 – 99(2009)e1 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
• ASTM A716 – 08 Standard Specification for Ductile Iron Culvert Pipe
• ASTM A717/A717M – 12 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
• ASTM A719/A719M – 02(2007) Standard Test Method for Lamination Factor of Magnetic Materials
• ASTM A720/A720M – 02(2011) Standard Test Method for Ductility of Nonoriented Electrical Steel
• ASTM A721/A721M – 02(2011) Standard Test Method for Ductility of Oriented Electrical Steel
• ASTM A722/A722M – 12 Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete
• ASTM A723/A723M – 10 Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
• ASTM A724/A724M – 09 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels
• ASTM A726 – 05(2010) Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
• ASTM A727/A727M – 11 Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
• ASTM A729/A729M – 09e1 Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
• ASTM A732/A732M – 09 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
• ASTM A733 – 03(2009)e1 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
• ASTM A734/A734M – 12 Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
• ASTM A735/A735M – 12 Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
• ASTM A736/A736M – 12 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Steel
• ASTM A737/A737M – 09 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
• ASTM A738/A738M – 12a Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
• ASTM A739 – 90a(2012) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
• ASTM A740 – 98(2008) Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
• ASTM A741 – 11e1 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
• ASTM A742/A742M – 13 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
• ASTM A743/A743M – 13 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
• ASTM A744/A744M – 10e1 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
• ASTM A745/A745M – 12 Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
• ASTM A746 – 09 Standard Specification for Ductile Iron Gravity Sewer Pipe
• ASTM A747/A747M – 12 Standard Specification for Steel Castings, Stainless, Precipitation Hardening
• ASTM A748/A748M – 87(2012) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
• ASTM A749/A749M – 08 Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
• ASTM A751 – 11 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
• ASTM A753 – 08 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
• ASTM A754/A754M – 11 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
• ASTM A755/A755M – 11 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
• ASTM A756 – 09 Standard Specification for Stainless Anti-Friction Bearing Steel
• ASTM A757/A757M – 10 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
• ASTM A758/A758M – 10 Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
• ASTM A759 – 10 Standard Specification for Carbon Steel Crane Rails
• ASTM A760/A760M – 10 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
• ASTM A761/A761M – 04(2009) Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
• ASTM A762/A762M – 08 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
• ASTM A763 – 93(2009) Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
• ASTM A764 – 07(2012) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
• ASTM A765/A765M – 07(2012) Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
• ASTM A767/A767M – 09 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
• ASTM A767/A767M-SP – 09 Especificación Normalizada para Barras de Acero Cincadas (Galvanizadas) para Refuerzo de Concreto
• ASTM A768/A768M – 05(2010) Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
• ASTM A769/A769M – 05(2010) Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
• ASTM A770/A770M – 03(2012) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
• ASTM A772/A772M – 00(2011)e1 Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current (www.tecert.com)
• ASTM A773/A773M – 01(2009) Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
• ASTM A774/A774M – 09 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
• ASTM A775/A775M – 07b Standard Specification for Epoxy-Coated Steel Reinforcing Bars
• ASTM A775/A775M-SP – 07b Especificación Normalizada para Barras de Acero de Refuerzo Recubiertas con Epoxi
• ASTM A778 – 01(2009)e1 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
• ASTM A779/A779M – 12 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete
• ASTM A780/A780M – 09 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
• ASTM A781/A781M – 13 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
• ASTM A786/A786M – 05(2009) Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
• ASTM A787/A787M – 09 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
• ASTM A788/A788M – 11 Standard Specification for Steel Forgings, General Requirements
• ASTM A789/A789M – 13 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
• ASTM A790/A790M – 13 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
• ASTM A792/A792M – 10 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
• ASTM A793 – 96(2009) Standard Specification for Rolled Floor Plate, Stainless Steel
• ASTM A794/A794M – 12 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16?% Maximum to 0.25?% Maximum), Cold-Rolled
• ASTM A795/A795M – 08(2012) Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
• ASTM A796/A796M – 10 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
• ASTM A798/A798M – 07 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
• ASTM A799/A799M – 10 Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
• ASTM A800/A800M – 10 Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
• ASTM A801 – 09 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
• ASTM A802/A802M – 95(2010)e1 Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
• ASTM A803/A803M – 12 Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
• ASTM A804/A804M – 04(2009)e1 Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
• ASTM A805/A805M – 09 Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
• ASTM A807/A807M – 02(2008) Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
• ASTM A809 – 08(2013) Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
• ASTM A810 – 01(2009)e1 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
• ASTM A811 – 03(2008) Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques
• ASTM A813/A813M – 09 Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
• ASTM A814/A814M – 08 Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
• ASTM A815/A815M – 10a Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
• ASTM A817 – 12 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
• ASTM A818 – 06(2010) Standard Specification for Coppered Carbon Steel Wire
• ASTM A820/A820M – 11 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
• ASTM A821/A821M – 10 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
• ASTM A822/A822M – 04(2010) Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
• ASTM A823 – 99(2012) Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
• ASTM A824 – 01(2012) Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
• ASTM A827/A827M – 11 Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
• ASTM A829/A829M – 11 Standard Specification for Alloy Structural Steel Plates
• ASTM A830/A830M – 11 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
• ASTM A832/A832M – 10 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
• ASTM A833 – 08a Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
• ASTM A834 – 95(2011) Standard Specification for Common Requirements for Iron Castings for General Industrial Use
• ASTM A835/A835M – 10 Standard Specification for Sizes of Ferroalloys and Alloy Additives
• ASTM A836/A836M – 02(2007) Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
• ASTM A837/A837M – 06(2011) Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
• ASTM A838 – 02(2007) Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
• ASTM A839 – 02(2008) Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications
• ASTM A841/A841M – 03a(2007) Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
• ASTM A842 – 11a Standard Specification for Compacted Graphite Iron Castings
• ASTM A844/A844M – 09 Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
• ASTM A847/A847M – 12 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
• ASTM A848 – 01(2011) Standard Specification for Low-Carbon Magnetic Iron
• ASTM A849 – 10 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
• ASTM A853 – 04(2010) Standard Specification for Steel Wire, Carbon, for General Use
• ASTM A854/A854M – 08(2013) Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
• ASTM A855/A855M – 03(2009) Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
• ASTM A856/A856M – 03(2009) Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
• ASTM A857/A857M – 07(2013) Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
• ASTM A858/A858M – 10a Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
• ASTM A859/A859M – 04(2009) Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
• ASTM A860/A860M – 10 Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
• ASTM A861 – 04(2008) Standard Specification for High-Silicon Iron Pipe and Fittings
• ASTM A862/A862M – 98(2008) Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
• ASTM A865/A865M – 06(2012) Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
• ASTM A866 – 09 Standard Specification for Medium Carbon Anti-Friction Bearing Steel
• ASTM A867 – 03(2008) Standard Specification for Iron-Silicon Relay Steels
• ASTM A871/A871M – 12 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
• ASTM A872/A872M – 07a(2012) Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
• ASTM A874/A874M – 98(2009) Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
• ASTM A875/A875M – 13 Standard Specification for Steel Sheet, Zinc-5?% Aluminum Alloy-Coated by the Hot-Dip Process
• ASTM A876 – 12 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
• ASTM A877/A877M – 10e1 Standard Specification for Steel Wire, Chromium-Silicon Alloy, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
• ASTM A878/A878M – 05(2011) Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
• ASTM A879/A879M – 12 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
• ASTM A881/A881M – 10 Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete Railroad Ties
• ASTM A882/A882M – 04a(2010) Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
• ASTM A884/A884M – 12 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
• ASTM A884/A884M-SP – 12 Especificación Normalizada para Alambre y Refuerzo Electrosoldado de Alambre de Acero Recubierto con Epoxi
• ASTM A886/A886M – 12 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
• ASTM A887 – 89(2009) Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
• ASTM A888 – 13 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
• ASTM A889/A889M – 03(2008) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame
• ASTM A890/A890M – 12a Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
• ASTM A891/A891M – 10 Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
• ASTM A892 – 09 Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
• ASTM A893/A893M – 03(2008) Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
• ASTM A894/A894M – 00(2011)e1 Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials
• ASTM A895 – 89(2009) Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
• ASTM A896/A896M – 09 Standard Practice for Conducting Case Studies on Galvanized Structures
• ASTM A897/A897M – 06(2011) Standard Specification for Austempered Ductile Iron Castings
• ASTM A898/A898M – 07(2012) Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
• ASTM A899 – 91(2007) Standard Specification for Steel Wire, Epoxy-Coated
• ASTM A900/A900M – 01(2012) Standard Test Method for Lamination Factor of Amorphous Magnetic Strip
• ASTM A901 – 12 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
• ASTM A902 – 13 Standard Terminology Relating to Metallic Coated Steel Products
• ASTM A903/A903M – 99(2012) Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
• ASTM A904 – 09 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts
• ASTM A905 – 04(2010) Standard Specification for Steel Wire, Pressure Vessel Winding
• ASTM A906/A906M – 02(2010) Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
• ASTM A908 – 03(2008)e1 Standard Specification for Stainless Steel Needle Tubing
• ASTM A909/A909M – 06(2011) Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
• ASTM A910/A910M – 12 Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete
• ASTM A911/A911M – 11 Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
• ASTM A912/A912M – 11 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
• ASTM A913/A913M – 11 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process
• ASTM A914/A914M – 92(2011) Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
• ASTM A915/A915M – 08(2013) Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
• ASTM A917 – 08 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
• ASTM A918 – 06(2011) Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
• ASTM A920/A920M – 07 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
• ASTM A921/A921M – 93(2011) Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
• ASTM A922 – 05(2010) Standard Specification for Silicon Metal
• ASTM A923 – 08 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
• ASTM A924/A924M – 13 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
• ASTM A925 – 03(2009)e1 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
• ASTM A926 – 03(2008) Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
• ASTM A927/A927M – 11 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
• ASTM A928/A928M – 11 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
• ASTM A929/A929M – 01(2007) Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
• ASTM A930 – 09 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
• ASTM A931 – 08(2013) Standard Test Method for Tension Testing of Wire Ropes and Strand
• ASTM A932/A932M – 01(2012) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
• ASTM A933/A933M – 10 Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement
• ASTM A934/A934M – 07 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
• ASTM A934/A934M-SP – 07 Especificación Normalizada para Barras de Acero de Refuerzo Prefabricadas Recubiertas con Epoxi
• ASTM A937/A937M – 12 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
• ASTM A938 – 07(2013) Standard Test Method for Torsion Testing of Wire
• ASTM A939/A939M – 12 Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
• ASTM A940/A940M – 06(2011) Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
• ASTM A941 – 13b Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
• ASTM A942 – 95(2012) Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells
• ASTM A943/A943M – 01(2009) Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
• ASTM A944 – 10 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
• ASTM A945/A945M – 06(2011) Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
• ASTM A947M – 13 Standard Specification for Textured Stainless Steel Sheet [Metric]
• ASTM A949/A949M – 01(2009) Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
• ASTM A950/A950M – 11 Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
• ASTM A951/A951M – 11 Standard Specification for Steel Wire for Masonry Joint Reinforcement
• ASTM A952/A952M – 02(2010) Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
• ASTM A955/A955M – 12e1 Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
• ASTM A956 – 12 Standard Test Method for Leeb Hardness Testing of Steel Products
• ASTM A957/A957M – 13 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
• ASTM A958/A958M – 10 Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
• ASTM A959 – 11 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
• ASTM A960/A960M – 10 Standard Specification for Common Requirements for Wrought Steel Piping Fittings
• ASTM A961/A961M – 12a Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
• ASTM A962/A962M – 13 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
• ASTM A964/A964M – 03(2011) Standard Specification for Corrugated Steel Box Culverts
• ASTM A965/A965M – 12 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
• ASTM A966/A966M – 08(2012) Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
• ASTM A967/A967M – 13 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
• ASTM A968/A968M – 96(2009) Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
• ASTM A970/A970M – 13 Standard Specification for Headed Steel Bars for Concrete Reinforcement
• ASTM A971/A971M – 10 Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
• ASTM A972/A972M – 00(2010) Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
• ASTM A973/A973M – 07(2012) Standard Specification for Grade 100 Alloy Steel Chain
• ASTM A974 – 97(2011) Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
• ASTM A975 – 11 Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
• ASTM A976 – 03(2008) Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application
• ASTM A977/A977M – 07 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
• ASTM A978/A978M – 08 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
• ASTM A979/A979M – 03(2009) Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
• ASTM A980/A980M – 11 Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
• ASTM A981/A981M – 11 Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
• ASTM A982/A982M – 10 Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
• ASTM A983/A983M – 06(2011) Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
• ASTM A984/A984M – 03(2009) Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded
• ASTM A985/A985M – 13 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
• ASTM A986/A986M – 01(2011) Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
• ASTM A987/A987M – 09 Standard Practice for Measuring Shape Characteristics of Tin Mill Products
• ASTM A988/A988M – 11 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
• ASTM A989/A989M – 11 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
• ASTM A990/A990M – 11e01 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
• ASTM A991/A991M – 10 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
• ASTM A992/A992M – 11 Standard Specification for Structural Steel Shapes
• ASTM A992/A992M-SP – 11 Especificación Normalizada para Perfiles de Acero Estructural
• ASTM A994 – 12 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
• ASTM A995/A995M – 12a Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
• ASTM A996/A996M – 09b Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
• ASTM A997 – 08(2012) Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
• ASTM A998/A998M – 12 Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications
• ASTM A999/A999M – 13 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
• ASTM A1000/A1000M – 11 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
• ASTM A1001 – 01(2010) Standard Specification for High Strength Steel Castings in Heavy Sections
• ASTM A1002 – 10 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
• ASTM A1003/A1003M – 13a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
• ASTM A1004/A1004M – 99(2009) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
• ASTM A1005/A1005M – 00(2010) Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded
• ASTM A1006/A1006M – 00(2010) Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded
• ASTM A1007 – 07 Standard Specification for Carbon Steel Wire for Wire Rope
• ASTM A1008/A1008M – 12a Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
• ASTM A1009 – 05(2010) Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications
• ASTM A1010/A1010M – 01(2009) Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip
• ASTM A1011/A1011M – 12b Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
• ASTM A1012 – 10 Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
• ASTM A1013 – 00(2013)e1 Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
• ASTM A1014/A1014M – 10 Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
• ASTM A1015 – 01(2009) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
• ASTM A1016/A1016M – 13 Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
• ASTM A1017/A1017M – 11 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
• ASTM A1018/A1018M – 10 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
• ASTM A1020/A1020M – 02(2012) Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications
• ASTM A1021/A1021M – 05(2010) Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
• ASTM A1022/A1022M – 13 Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
• ASTM A1023/A1023M – 09e1 Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
• ASTM A1024/A1024M – 02(2012) Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
• ASTM A1025/A1025M – 10 Standard Specification for Ferroalloys, General Requirements
• ASTM A1028 – 03(2009) Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
• ASTM A1030/A1030M – 11 Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
• ASTM A1031/A1031M – 12 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
• ASTM A1032 – 04(2010) Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe
• ASTM A1033 – 10 Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
• ASTM A1034/A1034M – 10a Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
• ASTM A1035/A1035M – 13 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
• ASTM A1036 – 04(2009) Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers
• ASTM A1037/A1037M – 05(2012) Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded
• ASTM A1038 – 10a Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
• ASTM A1039/A1039M – 13 Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
• ASTM A1040 – 10 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
• ASTM A1042/A1042M – 04(2009) Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains
• ASTM A1043/A1043M – 05(2009) Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
• ASTM A1044/A1044M – 05(2010) Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
• ASTM A1045 – 10 Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems
• ASTM A1046/A1046M – 10ae1 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
• ASTM A1047/A1047M – 05(2009) Standard Test Method for Pneumatic Leak Testing of Tubing
• ASTM A1048/A1048M – 06(2011) Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service
• ASTM A1049/A1049M – 10 Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
• ASTM A1053/A1053M – 12 Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
• ASTM A1054 – 07 Standard Specification for Sintered Ceramic Ferrite Permanent Magnets
• ASTM A1055/A1055M – 10e1 Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
• ASTM A1056 – 12 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
• ASTM A1057/A1057M – 08 Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
• ASTM A1058 – 12b Standard Test Methods for Mechanical Testing of Steel Products—Metric
• ASTM A1059/A1059M – 08(2013) Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
• ASTM A1060/A1060M – 11e1 Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
• ASTM A1061/A1061M – 09 Standard Test Methods for Testing Multi-Wire Steel Strand
• ASTM A1062 – 10 Standard Specification for Steel Castings Sampling
• ASTM A1063/A1063M – 11a Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
• ASTM A1064/A1064M – 12 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
• ASTM A1065/A1065M – 09 Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
• ASTM A1066/A1066M – 11 Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)
• ASTM A1067/A1067M – 12a Standard Specification for Test Coupons for Steel Castings
• ASTM A1068 – 10 Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products
• ASTM A1069/A1069M – 11 Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes
• ASTM A1071/A1071M – 11 Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
• ASTM A1072/A1072M – 11 Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products
• ASTM A1073/A1073M – 12 Standard Practice for Using Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic-Coated Steel Sheet
• ASTM A1074 – 11 Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
• ASTM A1075 – 12 Standard Specification for Flanged Steel U-Channel Posts
• ASTM A1076/A1076M – 12 Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel
• ASTM A1077/A1077M – 12 Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
• ASTM A1078/A1078M – 12 Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement
• ASTM A1079 – 13 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
• ASTM A1080 – 12 Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
• ASTM A1081/A1081M – 12 Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand
• ASTM A1082/A1082M – 12 Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
• ASTM A1083/A1083M – 12 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
• ASTM A1085 – 13 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
• ASTM B1 – 12 Standard Specification for Hard-Drawn Copper Wire
• ASTM B2 – 12e1 Standard Specification for Medium-Hard-Drawn Copper Wire
• ASTM B3 – 12 Standard Specification for Soft or Annealed Copper Wire
• ASTM B5 – 11 Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
• ASTM B6 – 13 Standard Specification for Zinc
• ASTM B8 – 11 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
• ASTM B9 – 90(2012) Standard Specification for Bronze Trolley Wire
• ASTM B16/B16M – 10 Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
• ASTM B19 – 10 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
• ASTM B21/B21M – 12 Standard Specification for Naval Brass Rod, Bar, and Shapes
• ASTM B22 – 13 Standard Specification for Bronze Castings for Bridges and Turntables
• ASTM B23 – 00(2010) Standard Specification for White Metal Bearing Alloys (Known Commercially as “Babbitt Metal”)
• ASTM B26/B26M – 12 Standard Specification for Aluminum-Alloy Sand Castings
• ASTM B29 – 03(2009) Standard Specification for Refined Lead
• ASTM B30 – 12 Standard Specification for Copper Alloys in Ingot Form
• ASTM B32 – 08 Standard Specification for Solder Metal
• ASTM B33 – 10 Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes
• ASTM B36/B36M – 08a Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
• ASTM B37 – 08 Standard Specification for Aluminum for Use in Iron and Steel Manufacture
• ASTM B39 – 79(2013) Standard Specification for Nickel
• ASTM B42 – 10 Standard Specification for Seamless Copper Pipe, Standard Sizes
• ASTM B43 – 09 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
• ASTM B47 – 95a(2012) Standard Specification for Copper Trolley Wire
• ASTM B48 – 00(2011) Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
• ASTM B49 – 10 Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
• ASTM B61 – 08 Standard Specification for Steam or Valve Bronze Castings
• ASTM B62 – 09 Standard Specification for Composition Bronze or Ounce Metal Castings
• ASTM B63 – 07(2013) Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
• ASTM B66/B66M – 06e1 Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
• ASTM B67 – 05(2011) Standard Specification for Car and Tender Journal Bearings, Lined
• ASTM B68/B68M – 11 Standard Specification for Seamless Copper Tube, Bright Annealed
• ASTM B69 – 13 Standard Specification for Rolled Zinc
• ASTM B70 – 90(2013) Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
• ASTM B75/B75M – 11 Standard Specification for Seamless Copper Tube
• ASTM B76 – 90(2013) Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
• ASTM B77 – 07(2013) Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
• ASTM B78 – 90(2013) Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
• ASTM B80 – 09 Standard Specification for Magnesium-Alloy Sand Castings
• ASTM B84 – 07(2013) Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
• ASTM B85/B85M – 10 Standard Specification for Aluminum-Alloy Die Castings
• ASTM B86 – 13 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
• ASTM B88 – 09 Standard Specification for Seamless Copper Water Tube
• ASTM B88M – 05(2011) Standard Specification for Seamless Copper Water Tube (Metric)
• ASTM B90/B90M – 12 Standard Specification for Magnesium-Alloy Sheet and Plate
• ASTM B91 – 12 Standard Specification for Magnesium-Alloy? Forgings
• ASTM B92/B92M – 11 Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
• ASTM B93/B93M – 09 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
• ASTM B94 – 07 Standard Specification for Magnesium-Alloy Die Castings
• ASTM B96/B96M – 11 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
• ASTM B98/B98M – 08 Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes
• ASTM B99/B99M – 11 Standard Specification for Copper-Silicon Alloy Wire for General Applications
• ASTM B100 – 13 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
• ASTM B101 – 12 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
• ASTM B103/B103M – 10 Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
• ASTM B105 – 05(2012) Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
• ASTM B106 – 08 Standard Test Methods for Flexivity of Thermostat Metals
• ASTM B107/B107M – 12 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
• ASTM B108/B108M – 12e1 Standard Specification for Aluminum-Alloy Permanent Mold Castings
• ASTM B111/B111M – 11 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
• ASTM B114 – 07(2013) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
• ASTM B115 – 10 Standard Specification for Electrolytic Copper Cathode
• ASTM B116 – 95(2012) Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage
• ASTM B117 – 11 Standard Practice for Operating Salt Spray (Fog) Apparatus
• ASTM B121/B121M – 11 Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
• ASTM B122/B122M – 11 Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
• ASTM B124/B124M – 13 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
• ASTM B127 – 05(2009) Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
• ASTM B129 – 12 Standard Specification for Cartridge Brass Cartridge Case Cups
• ASTM B130 – 13 Standard Specification for Commercial Bronze Strip for Bullet Jackets
• ASTM B131 – 12 Standard Specification for Copper Alloy Bullet Jacket Cups
• ASTM B134/B134M – 08 Standard Specification for Brass Wire
• ASTM B135 – 10 Standard Specification for Seamless Brass Tube
• ASTM B135M – 10 Standard Specification for Seamless Brass Tube [Metric]
• ASTM B136 – 84(2013) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
• ASTM B137 – 95(2009) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
• ASTM B138/B138M – 11 Standard Specification for Manganese Bronze Rod, Bar, and Shapes
• ASTM B139/B139M – 12 Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
• ASTM B140/B140M – 12 Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
• ASTM B148 – 97(2009) Standard Specification for Aluminum-Bronze Sand Castings
• ASTM B150/B150M – 12 Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
• ASTM B151/B151M – 05(2011) Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
• ASTM B152/B152M – 13 Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
• ASTM B153 – 11 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
• ASTM B154 – 12 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
• ASTM B159/B159M – 11 Standard Specification for Phosphor Bronze Wire
• ASTM B160 – 05(2009)e1 Standard Specification for Nickel Rod and Bar
• ASTM B161 – 05(2009) Standard Specification for Nickel Seamless Pipe and Tube
• ASTM B162 – 99(2009) Standard Specification for Nickel Plate, Sheet, and Strip
• ASTM B163 – 11e1 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
• ASTM B164 – 03(2008) Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
• ASTM B165 – 05(2009) Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
• ASTM B166 – 11 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Rod, Bar,
• ASTM B167 – 11 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe an
• ASTM B168 – 11 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet,
• ASTM B169/B169M – 10 Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
• ASTM B170 – 99(2010)e1 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
• ASTM B171/B171M – 12 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
• ASTM B172 – 10 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
• ASTM B173 – 10 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
• ASTM B174 – 10 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
• ASTM B176 – 08 Standard Specification for Copper-Alloy Die Castings
• ASTM B177/B177M – 11 Standard Guide for Engineering Chromium Electroplating
• ASTM B179 – 11 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
• ASTM B183 – 79(2009) Standard Practice for Preparation of Low-Carbon Steel for Electroplating
• ASTM B187/B187M – 11 Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
• ASTM B188 – 10 Standard Specification for Seamless Copper Bus Pipe and Tube
• ASTM B189 – 05(2010) Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
• ASTM B193 – 02(2008) Standard Test Method for Resistivity of Electrical Conductor Materials
• ASTM B194 – 08 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
• ASTM B196/B196M – 07(2013) Standard Specification for Copper-Beryllium Alloy Rod and Bar
• ASTM B197/B197M – 07(2013) Standard Specification for Copper-Beryllium Alloy Wire
• ASTM B199 – 12 Standard Specification for Magnesium-Alloy Permanent Mold Castings
• ASTM B200 – 85(2009) Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
• ASTM B201 – 80(2009)e1 Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
• ASTM B206/B206M – 12 Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
• ASTM B208 – 06 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
• ASTM B208-CH – 06 铜合金砂型、永久型、离心型和连续铸造铸件拉伸试样制备规范
• ASTM B209 – 10 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
• ASTM B209M – 10 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
• ASTM B210 – 12 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
• ASTM B210M – 12 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric)
• ASTM B211 – 12e1 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
• ASTM B211M – 12e1 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)
• ASTM B212 – 13 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
• ASTM B213 – 13 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
• ASTM B214 – 07(2011) Standard Test Method for Sieve Analysis of Metal Powders
• ASTM B215 – 10 Standard Practices for Sampling Metal Powders
• ASTM B216 – 10 Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
• ASTM B221 – 13 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
• ASTM B221M – 13 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
• ASTM B223 – 08 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
• ASTM B224 – 10 Standard Classification of Coppers
• ASTM B226 – 11 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
• ASTM B227 – 10 Standard Specification for Hard-Drawn Copper-Clad Steel Wire
• ASTM B228 – 11a Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
• ASTM B229 – 12 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
• ASTM B230/B230M – 07(2012) Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes
• ASTM B231/B231M – 12 Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
• ASTM B232/B232M – 11 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
• ASTM B233 – 97(2012) Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
• ASTM B234 – 10 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
• ASTM B234M – 10 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]
• ASTM B236M – 07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]
• ASTM B236 – 07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
• ASTM B237 – 01(2010) Standard Specification for Refined Antimony
• ASTM B240 – 13 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
• ASTM B241/B241M – 12 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
• ASTM B242 – 99(2009) Standard Guide for Preparation of High-Carbon Steel for Electroplating
• ASTM B243 – 11 Standard Terminology of Powder Metallurgy
• ASTM B244 – 09 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
• ASTM B246 – 05(2010) Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
• ASTM B247 – 09 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
• ASTM B247M – 09 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
• ASTM B248 – 12 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
• ASTM B248M – 12 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)
• ASTM B249/B249M – 12 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
• ASTM B250/B250M – 13 Standard Specification for General Requirements for Wrought Copper Alloy Wire
• ASTM B251 – 10 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
• ASTM B251M – 10 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]
• ASTM B252 – 92(2009) Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
• ASTM B253 – 11 Standard Guide for Preparation of Aluminum Alloys for Electroplating
• ASTM B254 – 92(2009) Standard Practice for Preparation of and Electroplating on Stainless Steel
• ASTM B258 – 02(2008) Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
• ASTM B263 – 04(2010) Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
• ASTM B265 – 11e1 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• ASTM B267 – 07(2013) Standard Specification for Wire for Use In Wire-Wound Resistors
• ASTM B271 – 11 Standard Specification for Copper-Base Alloy Centrifugal Castings
• ASTM B272 – 12 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
• ASTM B275 – 05 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
• ASTM B276 – 05(2010) Standard Test Method for Apparent Porosity in Cemented Carbides
• ASTM B277 – 95(2012) Standard Test Method for Hardness of Electrical Contact Materials
• ASTM B280 – 13 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
• ASTM B281 – 88(2008) Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
• ASTM B283/B283M – 12 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
• ASTM B286 – 07(2012) Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
• ASTM B294 – 10 Standard Test Method for Hardness Testing of Cemented Carbides
• ASTM B296 – 03(2008) Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
• ASTM B298 – 12 Standard Specification for Silver-Coated Soft or Annealed Copper Wire
• ASTM B299 – 13 Standard Specification for Titanium Sponge
• ASTM B301/B301M – 08 Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
• ASTM B302 – 12 Standard Specification for Threadless Copper Pipe, Standard Sizes
• ASTM B306 – 13 Standard Specification for Copper Drainage Tube (DWV)
• ASTM B308/B308M – 10 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
• ASTM B311 – 13 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
• ASTM B312 – 09 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
• ASTM B313/B313M – 09 Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
• ASTM B315 – 12 Standard Specification for Seamless Copper Alloy Pipe and Tube
• ASTM B316/B316M – 10 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
• ASTM B317/B317M – 07 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
• ASTM B319 – 91(2009) Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
• ASTM B320 – 60(2008) Standard Practice for Preparation of Iron Castings for Electroplating
• ASTM B322 – 99(2009) Standard Guide for Cleaning Metals Prior to Electroplating
• ASTM B324 – 01(2012) Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
• ASTM B327 – 13 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
• ASTM B329 – 06(2012) Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
• ASTM B330 – 12 Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability
• ASTM B331 – 10 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
• ASTM B333 – 03(2013) Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
• ASTM B335 – 03(2013) Standard Specification for Nickel-Molybdenum Alloy Rod
• ASTM B338 – 10e1 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
• ASTM B339 – 12 Standard Specification for Pig Tin
• ASTM B343 – 92a(2009) Standard Practice for Preparation of Nickel for Electroplating with Nickel
• ASTM B344 – 11 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
• ASTM B345/B345M – 11 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
• ASTM B348 – 11 Standard Specification for Titanium and Titanium Alloy Bars and Billets
• ASTM B349/B349M – 09 Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
• ASTM B350/B350M – 11 Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
• ASTM B351/B351M – 08e1 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
• ASTM B352/B352M – 11 Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
• ASTM B353 – 12 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
• ASTM B354 – 12 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
• ASTM B355 – 11 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
• ASTM B359/B359M – 12 Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
• ASTM B360 – 09 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
• ASTM B361 – 08 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
• ASTM B362 – 91(2008) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
• ASTM B363 – 06a Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
• ASTM B364 – 96(2009) Standard Specification for Tantalum and Tantalum Alloy Ingots
• ASTM B365 – 12 Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
• ASTM B366 – 10a Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
• ASTM B367 – 09 Standard Specification for Titanium and Titanium Alloy Castings
• ASTM B368 – 09 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
• ASTM B369 – 09 Standard Specification for Copper-Nickel Alloy Castings
• ASTM B370 – 12 Standard Specification for Copper Sheet and Strip for Building Construction
• ASTM B371/B371M – 08 Standard Specification for Copper-Zinc-Silicon Alloy Rod
• ASTM B372 – 12a Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
• ASTM B373 – 00(2006) Standard Specification for Aluminum Foil for Capacitors
• ASTM B374 – 06(2011) Standard Terminology Relating to Electroplating
• ASTM B379 – 11 Standard Specification for Phosphorized Coppers—Refinery Shapes
• ASTM B380 – 97(2008)e1 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
• ASTM B381 – 10e1 Standard Specification for Titanium and Titanium Alloy Forgings
• ASTM B386 – 03(2011) Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
• ASTM B387 – 10 Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
• ASTM B388 – 06(2012) Standard Specification for Thermostat Metal Sheet and Strip
• ASTM B389 – 81(2008) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
• ASTM B391 – 09e1 Standard Specification for Niobium and Niobium Alloy Ingots
• ASTM B392 – 09e1 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
• ASTM B393 – 09e1 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
• ASTM B394 – 09e1 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
• ASTM B395/B395M – 08 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
• ASTM B398/B398M – 02(2013) Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
• ASTM B399/B399M – 04(2010) Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
• ASTM B400 – 08 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
• ASTM B401 – 12 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
• ASTM B403 – 12 Standard Specification for Magnesium-Alloy Investment Castings
• ASTM B406 – 96(2010) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
• ASTM B407 – 08a Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
• ASTM B408 – 06(2011) Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
• ASTM B409 – 06(2011) Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
• ASTM B411/B411M – 08 Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
• ASTM B413 – 97a(2012) Standard Specification for Refined Silver
• ASTM B415 – 98(2013) Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
• ASTM B416 – 98(2013) Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
• ASTM B417 – 11 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
• ASTM B418 – 12 Standard Specification for Cast and Wrought Galvanic Zinc Anodes
• ASTM B422 – 10 Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
• ASTM B423 – 11 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube
• ASTM B424 – 11 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Plate, Sheet, and Strip
• ASTM B425 – 11 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar
• ASTM B427 – 09 Standard Specification for Gear Bronze Alloy Castings
• ASTM B428 – 09 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
• ASTM B429/B429M – 10e1 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
• ASTM B432 – 09a Standard Specification for Copper and Copper Alloy Clad Steel Plate
• ASTM B434 – 06(2011) Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip
• ASTM B435 – 06(2011) Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
• ASTM B438 – 13 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
• ASTM B439 – 12 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
• ASTM B440 – 12 Standard Specification for Cadmium
• ASTM B441 – 04(2010) Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
• ASTM B443 – 00(2009) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip
• ASTM B444 – 06(2011) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
• ASTM B446 – 03(2008)e1 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar
• ASTM B447 – 12a Standard Specification for Welded Copper Tube
• ASTM B449 – 93(2010)e1 Standard Specification for Chromates on Aluminum
• ASTM B452 – 09 Standard Specification for Copper-Clad Steel Wire for Electronic Application
• ASTM B453/B453M – 11 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
• ASTM B455 – 10 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
• ASTM B456 – 11e1 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
• ASTM B457 – 67(2013) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
• ASTM B462 – 10e1 Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045,
• ASTM B463 – 10 Standard Specification for UNS N08020 Alloy Plate, Sheet, and Strip
• ASTM B464 – 10 Standard Specification for Welded UNS N08020 Alloy Pipe
• ASTM B465 – 11 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
• ASTM B466/B466M – 09 Standard Specification for Seamless Copper-Nickel Pipe and Tube
• ASTM B467 – 09 Standard Specification for Welded Copper-Nickel Pipe
• ASTM B468 – 10 Standard Specification for Welded UNS N08020 Alloy Tubes
• ASTM B470 – 02(2012) Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
• ASTM B472 – 10 Standard Specification for Nickel Alloy Billets and Bars for Reforging
• ASTM B473 – 07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
• ASTM B474 – 03(2009) Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
• ASTM B475 – 07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
• ASTM B476 – 01(2012) Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
• ASTM B477 – 97(2012) Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy
• ASTM B478 – 85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
• ASTM B479 – 06 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
• ASTM B480 – 88(2010) Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
• ASTM B481 – 68(2008) Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating
• ASTM B482 – 85(2008) Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
• ASTM B487 – 85(2007) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
• ASTM B488 – 11 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
• ASTM B489 – 85(2008)e1 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
• ASTM B490 – 09 Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
• ASTM B491/B491M – 06 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
• ASTM B493/B493M – 08e1 Standard Specification for Zirconium and Zirconium Alloy Forgings
• ASTM B494/B494M – 08 Standard Specification for Primary Zirconium
• ASTM B495 – 10 Standard Specification for Zirconium and Zirconium Alloy Ingots
• ASTM B496 – 13 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
• ASTM B497 – 00(2012) Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts
• ASTM B498/B498M – 08 Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
• ASTM B499 – 09 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
• ASTM B500/B500M – 12 Standard Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors
• ASTM B501 – 10 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
• ASTM B502 – 10 Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors
• ASTM B504 – 90(2011) Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
• ASTM B505/B505M – 12a Standard Specification for Copper Alloy Continuous Castings
• ASTM B506 – 09 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
• ASTM B507 – 86(2008)e1 Standard Practice for Design of Articles to Be Electroplated on Racks
• ASTM B508 – 08 Standard Specification for Copper Alloy Strip for Flexible Metal Hose
• ASTM B511 – 01(2009) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
• ASTM B512 – 04(2009) Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
• ASTM B514 – 05(2009) Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
• ASTM B515 – 95(2009) Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
• ASTM B516 – 03(2009) Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes
• ASTM B517 – 05(2009) Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
• ASTM B520 – 12 Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
• ASTM B521 – 12 Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
• ASTM B522 – 01(2012) Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
• ASTM B523/B523M – 12a Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
• ASTM B524/B524M – 99(2011) Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
• ASTM B527 – 06 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
• ASTM B528 – 12 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
• ASTM B530 – 09 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
• ASTM B532 – 85(2007) Standard Specification for Appearance of Electroplated Plastic Surfaces
• ASTM B533 – 85(2009) Standard Test Method for Peel Strength of Metal Electroplated Plastics
• ASTM B534 – 12 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
• ASTM B535 – 06(2011) Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
• ASTM B536 – 07(2013) Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
• ASTM B537 – 70(2007) Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
• ASTM B539 – 02(2008) Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
• ASTM B540 – 97(2012) Standard Specification for Palladium Electrical Contact Alloy
• ASTM B541 – 01(2012) Standard Specification for Gold Electrical Contact Alloy
• ASTM B542 – 13 Standard Terminology Relating to Electrical Contacts and Their Use
• ASTM B543/B543M – 12 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
• ASTM B545 – 97(2009) Standard Specification for Electrodeposited Coatings of Tin
• ASTM B546 – 04(2009) Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
• ASTM B547/B547M – 10 Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
• ASTM B548 – 03(2009) Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
• ASTM B549 – 13 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors
• ASTM B550/B550M – 07(2012) Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
• ASTM B551/B551M – 12 Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
• ASTM B552 – 12 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants
• ASTM B555 – 86(2007) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
• ASTM B556 – 90(2007) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
• ASTM B557 – 10 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
• ASTM B557M – 10 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
• ASTM B558 – 79(2008) Standard Practice for Preparation of Nickel Alloys for Electroplating
• ASTM B559 – 12 Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
• ASTM B560 – 00(2010) Standard Specification for Modern Pewter Alloys
• ASTM B561 – 94(2012) Standard Specification for Refined? Platinum
• ASTM B562 – 95(2012) Standard Specification for Refined Gold
• ASTM B563 – 01(2011) Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
• ASTM B564 – 11 Standard Specification for Nickel Alloy Forgings
• ASTM B565 – 04(2010) Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
• ASTM B566 – 04a(2011) Standard Specification for Copper-Clad Aluminum Wire
• ASTM B567 – 98(2009a) Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
• ASTM B568 – 98(2009) Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
• ASTM B569 – 09 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
• ASTM B570 – 06(2010) Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
• ASTM B571 – 97(2008)e1 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
• ASTM B572 – 06(2011) Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
• ASTM B573 – 06(2011) Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod
• ASTM B574 – 10 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten
• ASTM B575 – 10 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium
• ASTM B576 – 94(2010) Standard Guide for Arc Erosion Testing of Electrical Contact Materials
• ASTM B577 – 10 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
• ASTM B578 – 87(2009) Standard Test Method for Microhardness of Electroplated Coatings
• ASTM B579 – 73(2009) Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
• ASTM B580 – 79(2009) Standard Specification for Anodic Oxide Coatings on Aluminum
• ASTM B581 – 02(2013)e1 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
• ASTM B582 – 07(2013) Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
• ASTM B584 – 13 Standard Specification for Copper Alloy Sand Castings for General Applications
• ASTM B587 – 12 Standard Specification for Welded Brass Tube
• ASTM B588 – 88(2010) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
• ASTM B589 – 94(2012) Standard Specification for Refined Palladium
• ASTM B591 – 09 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
• ASTM B592 – 11 Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
• ASTM B593 – 96(2009)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
• ASTM B594 – 13 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
• ASTM B595 – 11 Standard Specification for Sintered Aluminum Structural Parts
• ASTM B596 – 89(2012) Standard Specification for Gold-Copper Alloy Electrical Contact Material
• ASTM B598 – 09 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
• ASTM B599 – 92(2009)e1 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
• ASTM B600 – 11 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
• ASTM B601 – 12 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
• ASTM B602 – 88(2010) Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
• ASTM B603 – 07(2013) Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
• ASTM B604 – 91(2008) Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
• ASTM B605 – 95a(2009) Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
• ASTM B606 – 08 Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
• ASTM B607 – 91(2009) Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
• ASTM B608 – 11 Standard Specification for Welded Copper-Alloy Pipe
• ASTM B609/B609M – 12 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
• ASTM B610 – 13 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders
• ASTM B611 – 85(2005) Standard Test Method for Abrasive Wear Resistance of Cemented Carbides
• ASTM B613 – 76(2012) Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
• ASTM B614 – 10 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
• ASTM B615 – 79(2011) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
• ASTM B616 – 96(2012) Standard Specification for Refined Rhodium
• ASTM B617 – 98(2010) Standard Specification for Coin Silver Electrical Contact Alloy
• ASTM B618/B618M – 11a Standard Specification for Aluminum-Alloy Investment Castings
• ASTM B619 – 10e1 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
• ASTM B620 – 03(2013) Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
• ASTM B621 – 02(2011) Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
• ASTM B622 – 10 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
• ASTM B624 – 07(2012) Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
• ASTM B625 – 05(2011) Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip
• ASTM B626 – 10e1 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
• ASTM B628 – 98(2010) Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
• ASTM B629 – 77(2008) Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
• ASTM B630 – 88(2010) Standard Practice for Preparation of Chromium for Electroplating with Chromium
• ASTM B631 – 93(2010) Standard Specification for Silver-Tungsten Electrical Contact Materials
• ASTM B632/B632M – 08 Standard Specification for Aluminum-Alloy Rolled Tread Plate
• ASTM B633 – 11 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
• ASTM B634 – 88(2009) Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
• ASTM B635 – 00(2009) Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
• ASTM B636 – 84(2010) Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
• ASTM B637 – 12e1 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
• ASTM B639 – 02(2013) Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS?R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
• ASTM B640 – 12a Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
• ASTM B643 – 12 Standard Specification for Copper-Beryllium Alloy Seamless Tube
• ASTM B644 – 11 Standard Specification for Copper Alloy Addition Agents
• ASTM B645 – 10 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
• ASTM B646 – 12 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
• ASTM B647 – 10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
• ASTM B648 – 10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
• ASTM B649 – 06(2011) Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
• ASTM B650 – 95(2008) Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
• ASTM B651 – 83(2010) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
• ASTM B652/B652M – 10 Standard Specification for Niobium-Hafnium Alloy Ingots
• ASTM B653/B653M – 11 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
• ASTM B654/B654M – 10 Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
• ASTM B655/B655M – 10 Standard Specification for Niobium-Hafnium Alloy Bar and Wire
• ASTM B657 – 11 Guide for Metallographic Identification of Microstructure in Cemented Carbides
• ASTM B658/B658M – 11e1 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
• ASTM B659 – 90(2008)e1 Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
• ASTM B660 – 08 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
• ASTM B661 – 12 Standard Practice for Heat Treatment of Magnesium Alloys
• ASTM B662 – 94(2012) Standard Specification for Silver-Molybdenum Electrical Contact Material
• ASTM B663 – 94(2012) Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
• ASTM B664 – 90(2012) Standard Specification for 80?% Silver-20?% Graphite Sliding Contact Material
• ASTM B665 – 08(2012) Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
• ASTM B666/B666M – 08 Standard Practice for Identification Marking of Aluminum and Magnesium Products
• ASTM B667 – 97(2009) Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
• ASTM B668 – 05(2010) Standard Specification for UNS N08028 Seamless Pipe and Tube
• ASTM B670 – 07(2013) Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
• ASTM B671 – 81(2010) Standard Specification for Refined Iridium
• ASTM B672 – 02(2013) Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
• ASTM B673 – 05(2011)e1 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
• ASTM B674 – 05(2011) Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube
• ASTM B675 – 02(2013) Standard Specification for UNS N08367 Welded Pipe
• ASTM B676 – 03(2009) Standard Specification for UNS N08367 Welded Tube
• ASTM B677 – 05(2010)e1 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
• ASTM B678 – 86(2011) Standard Test Method for Solderability of Metallic-Coated Products
• ASTM B679 – 98(2009) Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
• ASTM B680 – 80(2009) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
• ASTM B682 – 01(2009) Standard Specification for Standard Metric Sizes of Electrical Conductors
• ASTM B683 – 01(2012) Standard Specification for Pure Palladium Electrical Contact Material
• ASTM B684 – 97(2012) Standard Specification for Platinum-Iridium Electrical Contact Materials
• ASTM B685 – 01(2012) Standard Specification for Palladium-Copper Electrical Contact Material
• ASTM B686/B686M – 11 Standard Specification for Aluminum Alloy Castings, High-Strength
• ASTM B687 – 99(2011) Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
• ASTM B688 – 96(2009) Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
• ASTM B689 – 97(2008) Standard Specification for Electroplated Engineering Nickel Coatings
• ASTM B690 – 02(2013) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
• ASTM B691 – 02(2013) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
• ASTM B692 – 90(2012) Standard Specification for 75?% Silver-25 %?% Graphite Sliding Contact Material
• ASTM B693 – 91(2012) Standard Specification for Silver-Nickel Electrical Contact Materials
• ASTM B694 – 13 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
• ASTM B695 – 04(2009) Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
• ASTM B696 – 00(2009) Standard Specification for Coatings of Cadmium Mechanically Deposited
• ASTM B697 – 88(2010) Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
• ASTM B698 – 10 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
• ASTM B699 – 86(2008) Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
• ASTM B700 – 08 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
• ASTM B701/B701M – 13 Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
• ASTM B702 – 93(2010) Standard Specification for Copper-Tungsten Electrical Contact Material
• ASTM B703 – 10 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
• ASTM B704 – 03(2009) Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
• ASTM B705 – 05(2009) Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
• ASTM B706 – 00(2011) Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
• ASTM B708 – 12 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
• ASTM B709 – 04(2009) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip
• ASTM B710 – 04(2009) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
• ASTM B711 – 13 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
• ASTM B712 – 93(2012) Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
• ASTM B717 – 96(2012) Standard Specification for Refined Ruthenium
• ASTM B718 – 00(2011) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
• ASTM B719 – 00(2009) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar
• ASTM B722 – 06(2011) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
• ASTM B723 – 00(2009) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe
• ASTM B724 – 00(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
• ASTM B725 – 05(2009) Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
• ASTM B726 – 02(2011) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
• ASTM B727 – 04(2009) Standard Practice for Preparation of Plastics Materials for Electroplating
• ASTM B729 – 05(2009) Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube
• ASTM B730 – 08(2013) Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube
• ASTM B731 – 96(2012) Standard Specification for 60?% Palladium-40?% Silver Electrical Contact Material
• ASTM B733 – 04(2009) Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
• ASTM B734 – 97(2008) Standard Specification for Electrodeposited Copper for Engineering Uses
• ASTM B735 – 06(2011) Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
• ASTM B736 – 00(2006) Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
• ASTM B737 – 10 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
• ASTM B738 – 13 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
• ASTM B739 – 03(2013) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
• ASTM B740 – 09 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
• ASTM B742 – 90(2012) Standard Specification for Fine Silver Electrical Contact Fabricated Material
• ASTM B743 – 12 Standard Specification for Seamless Copper Tube in Coils
• ASTM B744/B744M – 05(2011) Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
• ASTM B745/B745M – 12 Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
• ASTM B746/B746M – 02(2012) Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
• ASTM B747 – 11 Standard Specification for Copper-Zirconium Alloy Sheet and Strip
• ASTM B748 – 90(2010) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
• ASTM B749 – 03(2009) Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
• ASTM B750 – 12 Standard Specification for GALFAN (Zinc-5?% Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
• ASTM B751 – 08(2013) Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
• ASTM B752 – 06(2011)e2 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
• ASTM B753 – 07(2013) Standard Specification for Thermostat Component Alloys
• ASTM B754 – 10 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
• ASTM B755 – 00(2011) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
• ASTM B756 – 00(2011) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar
• ASTM B757 – 00(2011) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
• ASTM B758 – 00(2011) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
• ASTM B759 – 00(2011) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
• ASTM B760 – 07(2013) Standard Specification for Tungsten Plate, Sheet, and Foil
• ASTM B761 – 06(2011) Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
• ASTM B762 – 90(2010) Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
• ASTM B763 – 13 Standard Specification for Copper Alloy Sand Castings for Valve Applications
• ASTM B764 – 04(2009) Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
• ASTM B765 – 03(2008) Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
• ASTM B766 – 86(2008) Standard Specification for Electrodeposited Coatings of Cadmium
• ASTM B767 – 88(2010) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
• ASTM B768 – 11 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
• ASTM B769 – 11 Standard Test Method for Shear Testing of Aluminum Alloys
• ASTM B770 – 10 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
• ASTM B771 – 11e1 Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
• ASTM B772 – 97(2012) Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
• ASTM B773 – 96(2008) Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies
• ASTM B774 – 00(2010) Standard Specification for Low Melting Point Alloys
• ASTM B775 – 13 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
• ASTM B776 – 12 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
• ASTM B777 – 07(2013) Standard Specification for Tungsten Base, High-Density Metal
• ASTM B778 – 02(2012) Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
• ASTM B779 – 12 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
• ASTM B780 – 98(2010) Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy
• ASTM B781 – 93a(2012) Standard Guide for Silver-Cadmium Oxide Contact Material
• ASTM B783 – 10 Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts
• ASTM B784 – 01(2012) Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
• ASTM B786 – 08(2013) Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
• ASTM B787/B787M – 04(2009) Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
• ASTM B788/B788M – 09 Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
• ASTM B789/B789M – 99(2011) Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
• ASTM B790/B790M – 11 Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
• ASTM B792 – 13 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
• ASTM B793 – 13 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
• ASTM B794 – 97(2009) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
• ASTM B795 – 07 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
• ASTM B796 – 07 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (PF) Applications
• ASTM B797 – 93(2007) Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts
• ASTM B798 – 95(2009) Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
• ASTM B799 – 95(2009) Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
• ASTM B800 – 05(2011) Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes – Annealed and Intermediate Tempers
• ASTM B801 – 07(2012) Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
• ASTM B802/B802M – 10 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
• ASTM B803 – 08 Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
• ASTM B804 – 02(2013) Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
• ASTM B805 – 06(2011) Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
• ASTM B806 – 08a Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
• ASTM B806-CH – 08a 标准修订草案铜合金永久铸模铸件一般应用标准
• ASTM B807/B807M – 06 Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
• ASTM B808 – 10 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
• ASTM B809 – 95(2008) Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)
• ASTM B810 – 01a(2011) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
• ASTM B811 – 13 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
• ASTM B812 – 96(2008) Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
• ASTM B813 – 10 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
• ASTM B814 – 06(2011) Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
• ASTM B815 – 02(2011) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
• ASTM B816 – 00(2009) Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited
• ASTM B817 – 08 Standard Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components
• ASTM B818 – 03(2013) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip
• ASTM B819 – 00(2011) Standard Specification for Seamless Copper Tube for Medical Gas Systems
• ASTM B820 – 09 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
• ASTM B821 – 10 Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
• ASTM B822 – 10 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
• ASTM B823 – 09 Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts
• ASTM B824 – 11 Standard Specification for General Requirements for Copper Alloy Castings
• ASTM B825 – 02(2008) Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
• ASTM B826 – 09 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
• ASTM B827 – 05(2009)e2 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
• ASTM B828 – 02(2010) Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
• ASTM B829 – 04A(2009)e1 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
• ASTM B830 – 11 Standard Specification for Uniform Test Methods and Frequency
• ASTM B831 – 11 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
• ASTM B832 – 93(2008) Standard Guide for Electroforming with Nickel and Copper
• ASTM B833 – 13 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
• ASTM B834 – 95(2009) Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
• ASTM B835 – 04(2009) Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction
• ASTM B836 – 00(2011) Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
• ASTM B837 – 10 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems
• ASTM B839 – 04(2009) Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod—Inclined Wedge Method
• ASTM B840 – 99(2009) Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits
• ASTM B841 – 99(2010) Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
• ASTM B842 – 99(2011) Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
• ASTM B843 – 07 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
• ASTM B844 – 98(2010) Standard Guide for Silver-Tin Oxide Contact Material
• ASTM B845 – 97(2008)e2 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
• ASTM B846 – 11a Standard Terminology for Copper and Copper Alloys
• ASTM B848 – 10 Specification for Powder Forged (P/F) Ferrous Materials
• ASTM B849 – 02(2013) Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
• ASTM B850 – 98(2009) Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
• ASTM B851 – 04(2009) Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
• ASTM B852 – 12 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
• ASTM B853 – 12 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
• ASTM B854 – 98(2010)e1 Standard Guide for Measuring Electrical Contact Intermittences
• ASTM B855 – 11 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
• ASTM B856 – 13 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
• ASTM B857 – 11e2 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
• ASTM B858 – 06(2012) Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
• ASTM B859 – 03(2008)e1 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
• ASTM B860 – 13 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
• ASTM B861 – 10 Standard Specification for Titanium and Titanium Alloy Seamless Pipe
• ASTM B862 – 09 Standard Specification for Titanium and Titanium Alloy Welded Pipe
• ASTM B863 – 12 Standard Specification for Titanium and Titanium Alloy Wire
• ASTM B864/B864M – 08 Standard Specification for Corrugated Aluminum Box Culverts
• ASTM B865 – 04(2010) Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
• ASTM B866 – 95(2008) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
• ASTM B867 – 95(2008) Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
• ASTM B868 – 96(2008) Standard Practice for Contact Performance Classification of Electrical Connection Systems
• ASTM B869 – 07(2013) Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
• ASTM B870 – 08 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
• ASTM B871 – 01(2007) Standard Test Method for Tear Testing of Aluminum Alloy Products
• ASTM B872 – 06(2011) Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
• ASTM B873 – 12 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
• ASTM B874 – 96(2008) Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
• ASTM B875 – 96(2008) Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
• ASTM B877 – 96(2008) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
• ASTM B878 – 97(2009) Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
• ASTM B879 – 97(2013) Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
• ASTM B880 – 03(2008) Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
• ASTM B881 – 09 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
• ASTM B882 – 10 Specification for Pre-Patinated Copper for Architectural Applications
• ASTM B883 – 10e1 Standard Specification for Metal Injection Molding (MIM) Ferrous Materials
• ASTM B884 – 11 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
• ASTM B885 – 09 Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
• ASTM B886 – 12 Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
• ASTM B887 – 12 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
• ASTM B888 – 12 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
• ASTM B890 – 07(2012) Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
• ASTM B891 – 12 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer
• ASTM B892 – 10 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
• ASTM B893 – 98(2013) Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
• ASTM B894 – 10e1 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings
• ASTM B895 – 05(2010)e1 Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution
• ASTM B896 – 10e1 Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
• ASTM B897 – 10 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo Block and Half Block Ingot
• ASTM B898 – 11 Standard Specification for Reactive and Refractory Metal Clad Plate
• ASTM B899 – 13 Standard Terminology Relating to Non-ferrous Metals and Alloys
• ASTM B900 – 04(2010) Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
• ASTM B901 – 04(2011) Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
• ASTM B902 – 13 Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction
• ASTM B903 – 10 Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
• ASTM B904 – 00(2009) Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
• ASTM B905 – 00(2010) Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
• ASTM B906 – 02(2012) Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
• ASTM B907 – 13 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
• ASTM B908 – 09 Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
• ASTM B909 – 00(2011) Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
• ASTM B910/B910M – 07(2013) Standard Specification for Annealed Copper-Clad Steel Wire
• ASTM B911/B911M – 12 Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
• ASTM B912 – 02(2013) Standard Specification for Passivation of Stainless Steels Using Electropolishing
• ASTM B913 – 05(2010) Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
• ASTM B914 – 13 Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
• ASTM B915 – 01(2013) Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating
• ASTM B916 – 01(2013)e1 Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
• ASTM B917/B917M – 12 Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
• ASTM B918/B918M – 09 Standard Practice for Heat Treatment of Wrought Aluminum Alloys
• ASTM B919 – 12 Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
• ASTM B920 – 01(2011) Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
• ASTM B921 – 08(2013) Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
• ASTM B922 – 10 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
• ASTM B923 – 10 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
• ASTM B924 – 02(2012) Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
• ASTM B925 – 08 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
• ASTM B926 – 09 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
• ASTM B927/B927M – 09 Standard Specification for Brass Rod, Bar, and Shapes
• ASTM B928/B928M – 09 Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments
• ASTM B929 – 05(2011)e1 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
• ASTM B930 – 03(2012) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
• ASTM B931 – 09 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (P/M) Parts
• ASTM B932 – 04(2010) Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip
• ASTM B933 – 09 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
• ASTM B934 – 10 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
• ASTM B935 – 05(2009)e1 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials
• ASTM B936 – 08 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
• ASTM B937 – 04(2010) Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
• ASTM B939 – 09 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and Structural Materials
• ASTM B940 – 05(2009)e1 Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
• ASTM B941 – 10 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
• ASTM B942 – 10e1 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
• ASTM B943 – 13 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
• ASTM B944 – 11 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
• ASTM B945 – 06 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
• ASTM B946 – 11 Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products
• ASTM B947 – 06(2013) Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
• ASTM B949 – 08 Standard Specification for General Requirements for Zinc and Zinc Alloy Products
• ASTM B950 – 11a Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
• ASTM B951 – 11 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
• ASTM B952/B952M – 13 Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
• ASTM B953 – 07 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
• ASTM B954 – 07 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
• ASTM B955/B955M – 11 Standard Specification for Aluminum-Alloy Centrifugal Castings
• ASTM B956 – 10 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
• ASTM B957 – 08 Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors
• ASTM B958 – 08 Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
• ASTM B960 – 13 Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc
• ASTM B961 – 13 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application
• ASTM B962 – 13 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
• ASTM B963 – 13 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
• ASTM B964 – 09 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
• ASTM B965 – 09 Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
• ASTM B966 – 10 Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas
• ASTM B967/B967M – 12a Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
• ASTM B968/B968M – 10 Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
• ASTM B969/B969M – 11 Standard Specification for Aluminum-Alloy Castings Produced by the Squeeze Casting, Thixocast and Rheocast Semi-Solid Casting Processes
• ASTM B970 – 09 Standard Test Method for Cleanliness of Powder Metallurgy (PM) Bearings and Structural Parts
• ASTM B971 – 10 Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
• ASTM B972 – 10 Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application
• ASTM B973 – 10 Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
• ASTM B974/B974M – 12a Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire
• ASTM B976 – 11 Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR)
• ASTM B977 – 11 Standard Specification for Titanium and Titanium Ingots
• ASTM B979 – 12 Standard Specification for Non-Specular (NS) Surface Finish on Overhead Aluminum Electrical Conductors
• ASTM B981/B981M – 12 Standard Specification for Low Leaded Brass Rod, Bar and Shapes
• ASTM B982 – 12 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric OR ICP Analysis
• ASTM B983 – 13 Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube
• ASTM B984 – 12 Standard Specification for Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use
• ASTM B985 – 12 Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis
• ASTM B986 – 13 Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application
• ASTM B988 – 13 Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components
• ASTM C4 – 04(2009) Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile
• ASTM C5 – 10 Standard Specification for Quicklime for Structural Purposes
• ASTM C10/C10M – 10 Standard Specification for Natural Cement
• ASTM C11 – 13 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
• ASTM C12 – 13 Standard Practice for Installing Vitrified Clay Pipe Lines
• ASTM C14 – 11 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
• ASTM C14M – 11 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
• ASTM C16 – 03(2012) Standard Test Method for Load Testing Refractory Shapes at High Temperatures
• ASTM C20 – 00(2010) Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
• ASTM C22/C22M – 00(2010) Standard Specification for Gypsum
• ASTM C24 – 09 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials
• ASTM C25 – 11 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
• ASTM C27 – 98(2008) Standard Classification of Fireclay and High-Alumina Refractory Brick
• ASTM C28/C28M – 10 Standard Specification for Gypsum Plasters
• ASTM C29/C29M – 09 Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate
• ASTM C31/C31M – 12 Standard Practice for Making and Curing Concrete Test Specimens in the Field
• ASTM C31/C31M-SP – 12 Práctica Normalizada para Preparación y Curado de Especímenes de Ensayo de Concreto en la Obra
• ASTM C32 – 11 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)
• ASTM C33/C33M – 13 Standard Specification for Concrete Aggregates
• ASTM C33/C33M-SP – 13 Especificación Normalizada para Agregados para Concreto
• ASTM C34 – 12 Standard Specification for Structural Clay Load-Bearing Wall Tile
• ASTM C35 – 01(2009) Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
• ASTM C39/C39M – 12a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
• ASTM C39/C39M-SP – 12a Método de Ensayo Normalizado para Resistencia a la Compresión de Especímenes Cilíndricos de Concreto
• ASTM C40/C40M – 11 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
• ASTM C42/C42M – 13 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
• ASTM C42/C42M-SP – 13 Método Normalizado de Ensayo de Obtención y Ensayo de Núcleos Perforados y Vigas Aserradas de Concreto
• ASTM C50/C50M – 12 Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
• ASTM C51 – 11 Standard Terminology Relating to Lime and Limestone (as used by the Industry)
• ASTM C55 – 11 Standard Specification for Concrete Building Brick
• ASTM C56 – 12 Standard Specification for Structural Clay Nonloadbearing Tile
• ASTM C59/C59M – 00(2011) Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
• ASTM C61/C61M – 00(2011) Standard Specification for Gypsum Keene’s Cement
• ASTM C62 – 12 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
• ASTM C67 – 12 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
• ASTM C70 – 13 Standard Test Method for Surface Moisture in Fine Aggregate
• ASTM C71 – 12 Standard Terminology Relating to Refractories
• ASTM C73 – 10 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)
• ASTM C76 – 13a Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
• ASTM C76M – 13a Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
• ASTM C78/C78M – 10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
• ASTM C87/C87M – 10 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
• ASTM C88 – 05 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
• ASTM C90 – 12 Standard Specification for Loadbearing Concrete Masonry Units
• ASTM C91/C91M – 12 Standard Specification for Masonry Cement
• ASTM C92 – 95(2010) Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
• ASTM C94/C94M – 13 Standard Specification for Ready-Mixed Concrete
• ASTM C94/C94M-SP – 13 Especificación Normalizada para Concreto Premezclado
• ASTM C97/C97M – 09 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
• ASTM C99/C99M – 09 Standard Test Method for Modulus of Rupture of Dimension Stone
• ASTM C108 – 46(2009) Standard Symbols for Heat Transmission
• ASTM C109/C109M – 12 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
• ASTM C109/C109M-SP – 12 Método Normalizado de Ensayo de Resistencia a Compresión de Morteros de Cemento Hidráulico (Utilizando Especímenes Cúbicos de 2 in. o [50-mm])
• ASTM C110 – 11 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
• ASTM C113 – 02(2008) Standard Test Method for Reheat Change of Refractory Brick
• ASTM C114 – 11b Standard Test Methods for Chemical Analysis of Hydraulic Cement
• ASTM C115 – 10 Standard Test Method for Fineness of Portland Cement by the Turbidimeter
• ASTM C117 – 13 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
• ASTM C118 – 11 Standard Specification for Concrete Pipe for Irrigation or Drainage
• ASTM C118M – 11 Standard Specification for Concrete Pipe for Irrigation or Drainage (Metric)
• ASTM C119 – 11 Standard Terminology Relating to Dimension Stone
• ASTM C120/C120M – 12 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
• ASTM C121/C121M – 09e1 Standard Test Method for Water Absorption of Slate
• ASTM C123/C123M – 12 Standard Test Method for Lightweight Particles in Aggregate
• ASTM C125 – 13 Standard Terminology Relating to Concrete and Concrete Aggregates
• ASTM C126 – 12a Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
• ASTM C127 – 12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
• ASTM C128 – 12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
• ASTM C129 – 11 Standard Specification for Nonloadbearing Concrete Masonry Units
• ASTM C131 – 06 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
• ASTM C133 – 97(2008)e1 Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
• ASTM C134 – 95(2010) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
• ASTM C135 – 96(2009)e1 Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
• ASTM C136 – 06 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
• ASTM C138/C138M – 13 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
• ASTM C139 – 11 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
• ASTM C140 – 13 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
• ASTM C141/C141M – 09 Standard Specification for Hydrated Hydraulic Lime for Structural Purposes
• ASTM C142/C142M – 10 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
• ASTM C143/C143M – 12 Standard Test Method for Slump of Hydraulic-Cement Concrete
• ASTM C144 – 11 Standard Specification for Aggregate for Masonry Mortar
• ASTM C144-SP – 11 Especificación Normalizada para Agregados para Morteros de Alba?ilería
• ASTM C146 – 94a(2009) Standard Test Methods for Chemical Analysis of Glass Sand
• ASTM C147 – 86(2010) Standard Test Methods for Internal Pressure Strength of Glass Containers
• ASTM C148 – 12 Standard Test Methods for Polariscopic Examination of Glass Containers
• ASTM C149 – 86(2010) Standard Test Method for Thermal Shock Resistance of Glass Containers
• ASTM C150/C150M – 12 Standard Specification for Portland Cement
• ASTM C150/C150M-SP – 12 Especificación Normalizada para Cemento Portland
• ASTM C151/C151M – 09 Standard Test Method for Autoclave Expansion of Hydraulic Cement
• ASTM C155 – 97(2007) Standard Classification of Insulating Firebrick
• ASTM C156 – 11 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
• ASTM C157/C157M – 08 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
• ASTM C158 – 02(2012) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
• ASTM C159 – 06(2011) Standard Specification for Vitrified Clay Filter Blocks
• ASTM C162 – 05(2010) Standard Terminology of Glass and Glass Products
• ASTM C163 – 05(2010) Standard Practice for Mixing Thermal Insulating Cement Samples
• ASTM C165 – 07(2012) Standard Test Method for Measuring Compressive Properties of Thermal Insulations
• ASTM C166 – 05(2010) Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
• ASTM C167 – 09 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
• ASTM C168 – 13 Standard Terminology Relating to Thermal Insulation
• ASTM C169 – 92(2011) Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
• ASTM C170/C170M – 09 Standard Test Method for Compressive Strength of Dimension Stone
• ASTM C171 – 07 Standard Specification for Sheet Materials for Curing Concrete
• ASTM C172/C172M – 10 Standard Practice for Sampling Freshly Mixed Concrete
• ASTM C172/C172M-SP – 10 Práctica Normalizada para Muestreo de Concreto Recién Mezclado
• ASTM C173/C173M – 12 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
• ASTM C174/C174M – 12 Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
• ASTM C177 – 10 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
• ASTM C179 – 11 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
• ASTM C181 – 11 Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics
• ASTM C182 – 88(2009) Standard Test Method for Thermal Conductivity of Insulating Firebrick
• ASTM C183 – 08 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
• ASTM C185 – 08 Standard Test Method for Air Content of Hydraulic Cement Mortar
• ASTM C186 – 05 Standard Test Method for Heat of Hydration of Hydraulic Cement
• ASTM C187 – 11e1 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
• ASTM C188 – 09 Standard Test Method for Density of Hydraulic Cement
• ASTM C191 – 08 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
• ASTM C192/C192M – 12a Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
• ASTM C195 – 07(2013) Standard Specification for Mineral Fiber Thermal Insulating Cement
• ASTM C196 – 00(2010) Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
• ASTM C198 – 09 Standard Test Method for Cold Bonding Strength of Refractory Mortar
• ASTM C199 – 84(2011) Standard Test Method for Pier Test for Refractory Mortars
• ASTM C201 – 93(2009) Standard Test Method for Thermal Conductivity of Refractories
• ASTM C202 – 93(2009)e1 Standard Test Method for Thermal Conductivity of Refractory Brick
• ASTM C203 – 05a(2012) Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
• ASTM C204 – 11 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
• ASTM C206 – 03(2009) Standard Specification for Finishing Hydrated Lime
• ASTM C207 – 06(2011) Standard Specification for Hydrated Lime for Masonry Purposes
• ASTM C208 – 12 Standard Specification for Cellulosic Fiber Insulating Board
• ASTM C209 – 12 Standard Test Methods for Cellulosic Fiber Insulating Board
• ASTM C210 – 95(2007)e1 Standard Test Method for Reheat Change of Insulating Firebrick
• ASTM C212 – 10 Standard Specification for Structural Clay Facing Tile
• ASTM C215 – 08 Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens
• ASTM C216 – 12a Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
• ASTM C217/C217M – 09 Standard Test Method for Weather Resistance of Slate
• ASTM C219 – 07a Standard Terminology Relating to Hydraulic Cement
• ASTM C220 – 91(2009) Standard Specification for Flat Asbestos-Cement Sheets
• ASTM C221 – 98(2008) Standard Specification for Corrugated Asbestos-Cement Sheets
• ASTM C222 – 97(2008) Standard Specification for Asbestos-Cement Roofing Shingles
• ASTM C223 – 98(2008) Standard Specification for Asbestos-Cement Siding
• ASTM C224 – 78(2009) Standard Practice for Sampling Glass Containers
• ASTM C225 – 85(2009) Standard Test Methods for Resistance of Glass Containers to Chemical Attack
• ASTM C226 – 12 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
• ASTM C227 – 10 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
• ASTM C230/C230M – 08 Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
• ASTM C231/C231M – 10 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
• ASTM C231/C231M-SP – 10 Método de Ensayo Normalizado de Contenido de Aire del Concreto Recién Mezclado Mediante el Método por Presión
• ASTM C232/C232M – 12 Standard Test Methods for Bleeding of Concrete
• ASTM C233/C233M – 11 Standard Test Method for Air-Entraining Admixtures for Concrete
• ASTM C240 – 08(2012) Standard Test Methods of Testing Cellular Glass Insulation Block
• ASTM C241/C241M – 13 Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
• ASTM C242 – 12 Standard Terminology of Ceramic Whitewares and Related Products
• ASTM C260/C260M – 10a Standard Specification for Air-Entraining Admixtures for Concrete
• ASTM C260/C260M-SP – 10a Especificación Normalizada para Aditivos Incorporadores de Aire para Concreto
• ASTM C265 – 08 Standard Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar
• ASTM C266 – 08e1 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
• ASTM C267 – 01(2012) Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
• ASTM C270 – 12a Standard Specification for Mortar for Unit Masonry
• ASTM C271/C271M – 11 Standard Test Method for Density of Sandwich Core Materials
• ASTM C272/C272M – 12 Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions
• ASTM C273/C273M – 11 Standard Test Method for Shear Properties of Sandwich Core Materials
• ASTM C274 – 07 Standard Terminology of Structural Sandwich Constructions
• ASTM C279 – 12 Standard Specification for Chemical-Resistant Masonry Units
• ASTM C282 – 10 Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test)
• ASTM C283 – 97(2008) Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid
• ASTM C285 – 10 Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
• ASTM C286 – 99(2009) Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems
• ASTM C287 – 98(2012) Standard Specification for Chemical-Resistant Sulfur Mortar
• ASTM C288 – 87(2009) Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
• ASTM C289 – 07 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
• ASTM C293/C293M – 10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
• ASTM C294 – 12 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
• ASTM C295/C295M – 12 Standard Guide for Petrographic Examination of Aggregates for Concrete
• ASTM C296/C296M – 00(2009)e1 Standard Specification for Asbestos-Cement Pressure Pipe
• ASTM C297/C297M – 04(2010) Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
• ASTM C301 – 13 Standard Test Methods for Vitrified Clay Pipe
• ASTM C302 – 95(2007) Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
• ASTM C303 – 10 Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
• ASTM C305 – 12 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
• ASTM C307 – 03(2012) Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
• ASTM C308 – 00(2012)e1 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
• ASTM C309 – 11 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
• ASTM C311/C311M – 13 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
• ASTM C315 – 07(2011) Standard Specification for Clay Flue Liners and Chimney Pots
• ASTM C317/C317M – 00(2010) Standard Specification for Gypsum Concrete
• ASTM C318/C318M – 00(2010) Standard Specification for Gypsum Formboard
• ASTM C321 – 00(2012) Standard Test Method for Bond Strength of Chemical-Resistant Mortars
• ASTM C322 – 09 Standard Practice for Sampling Ceramic Whiteware Clays
• ASTM C323 – 56(2011) Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays
• ASTM C324 – 01(2007) Standard Test Method for Free Moisture in Ceramic Whiteware Clays
• ASTM C325 – 07 Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays
• ASTM C326 – 09 Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
• ASTM C329 – 88(2011) Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
• ASTM C330/C330M – 09 Standard Specification for Lightweight Aggregates for Structural Concrete
• ASTM C330/C330M-SP – 09 Especificación Normalizada para Agregados Livianos para Concreto Estructural
• ASTM C331/C331M – 10 Standard Specification for Lightweight Aggregates for Concrete Masonry Units
• ASTM C332 – 09 Standard Specification for Lightweight Aggregates for Insulating Concrete
• ASTM C335/C335M – 10e1 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
• ASTM C336 – 71(2010) Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
• ASTM C338 – 93(2008) Standard Test Method for Softening Point of Glass
• ASTM C341/C341M – 06 Standard Practice for Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete
• ASTM C346 – 87(2009) Standard Test Method for 45-deg Specular Gloss of Ceramic Materials
• ASTM C348 – 08 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
• ASTM C349 – 08 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
• ASTM C356 – 10 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
• ASTM C357 – 07(2009)e1 Standard Test Method for Bulk Density of Granular Refractory Materials
• ASTM C359 – 08 Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)
• ASTM C361M – 12 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)
• ASTM C361 – 12 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
• ASTM C363/C363M – 09 Standard Test Method for Node Tensile Strength of Honeycomb Core Materials
• ASTM C364/C364M – 07(2012) Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
• ASTM C365/C365M – 11a Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
• ASTM C366/C366M – 11 Standard Test Methods for Measurement of Thickness of Sandwich Cores
• ASTM C367/C367M – 09 Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
• ASTM C368 – 88(2011) Standard Test Method for Impact Resistance of Ceramic Tableware
• ASTM C370 – 12 Standard Test Method for Moisture Expansion of Fired Whiteware Products
• ASTM C371 – 09 Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
• ASTM C372 – 94(2012) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
• ASTM C373 – 88(2006) Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products
• ASTM C374 – 70(2009) Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
• ASTM C375 – 58(2011)e1 Standard Classification of Water Used in Milling of Porcelain Enamel
• ASTM C384 – 04(2011) Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
• ASTM C385 – 58(2009) Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils
• ASTM C386 – 93(2012) Standard Practice for Use of Chemical-Resistant Sulfur Mortar
• ASTM C387/C387M – 11b Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
• ASTM C390 – 08e1 Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
• ASTM C393/C393M – 11e1 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
• ASTM C394 – 00(2008) Standard Test Method for Shear Fatigue of Sandwich Core Materials
• ASTM C395 – 01(2012) Standard Specification for Chemical-Resistant Resin Mortars
• ASTM C397 – 00(2012) Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
• ASTM C398 – 98(2012) Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry
• ASTM C399 – 98(2012) Standard Practice for Use of Chemical-Resistant Resin Mortars
• ASTM C400 – 98(2006) Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
• ASTM C401 – 12 Standard Classification of Alumina and Alumina-Silicate Castable Refractories
• ASTM C403/C403M – 08 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
• ASTM C404 – 11 Standard Specification for Aggregates for Masonry Grout
• ASTM C406/C406M – 10 Standard Specification for Roofing Slate
• ASTM C408 – 88(2011) Standard Test Method for Thermal Conductivity of Whiteware Ceramics
• ASTM C410 – 11 Standard Specification for Industrial Floor Brick
• ASTM C411 – 11 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
• ASTM C412 – 11 Standard Specification for Concrete Drain Tile
• ASTM C412M – 11 Standard Specification for Concrete Drain Tile (Metric)
• ASTM C413 – 01(2012) Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
• ASTM C414 – 03(2012) Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
• ASTM C416 – 97(2007) Standard Classification of Silica Refractory Brick
• ASTM C417 – 05(2010)e1 Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
• ASTM C418 – 12 Standard Test Method for Abrasion Resistance of Concrete by Sandblasting
• ASTM C419 – 08 Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
• ASTM C421 – 08 Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
• ASTM C423 – 09a Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
• ASTM C424 – 93(2012) Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
• ASTM C425 – 04(2009) Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
• ASTM C425-SP – 04(2009) Especificación estándar para juntas de compresión para tuberías y accesorios de arcilla vitrificada
• ASTM C426 – 10 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
• ASTM C428/C428M – 05(2011)e1 Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe
• ASTM C429 – 01(2011) Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
• ASTM C430 – 08 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
• ASTM C441/C441M – 11 Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
• ASTM C443M – 11 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)
• ASTM C443 – 12 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
• ASTM C444M – 03(2009) Standard Specification for Perforated Concrete Pipe (Metric)
• ASTM C444 – 03(2009) Standard Specification for Perforated Concrete Pipe
• ASTM C447 – 03(2010) Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
• ASTM C448 – 88(2011)e1 Standard Test Methods for Abrasion Resistance of Porcelain Enamels
• ASTM C449 – 07(2013) Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
• ASTM C450 – 08 Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
• ASTM C451 – 08 Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
• ASTM C452/C452M – 10 Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
• ASTM C454 – 10 Standard Test Method for Disintegration of Carbon Refractories by Alkali
• ASTM C455 – 07 Standard Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick
• ASTM C456 – 93(2008) Standard Test Method for Hydration Resistance of Basic Bricks and Shapes
• ASTM C457/C457M – 12 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
• ASTM C458/C458M – 98(2011)e1 Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
• ASTM C459/C459M – 97(2011)e1 Standard Test Methods for Asbestos-Cement Flat Products
• ASTM C461 – 81(2008) Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
• ASTM C465 – 10 Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
• ASTM C466 – 03(2012) Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars
• ASTM C467 – 97(2008) Standard Classification of Mullite Refractories
• ASTM C469/C469M – 10 Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression
• ASTM C470/C470M – 09 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
• ASTM C471M – 01(2012) Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)
• ASTM C472 – 99(2009) Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
• ASTM C473 – 12 Standard Test Methods for Physical Testing of Gypsum Panel Products
• ASTM C474 – 12 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
• ASTM C475/C475M – 12 Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
• ASTM C476 – 10 Standard Specification for Grout for Masonry
• ASTM C478M – 13 Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric)
• ASTM C478 – 13 Standard Specification for Precast Reinforced Concrete Manhole Sections
• ASTM C479 – 04(2008) Standard Specification for Vitrified Clay Liner Plates
• ASTM C480/C480M – 08 Standard Test Method for Flexure Creep of Sandwich Constructions
• ASTM C481 – 99(2011) Standard Test Method for Laboratory Aging of Sandwich Constructions
• ASTM C482 – 02(2009) Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
• ASTM C484 – 99(2009) Standard Test Method for Thermal Shock Resistance of Glazed Ceramic Tile
• ASTM C485 – 09 Standard Test Method for Measuring Warpage of Ceramic Tile
• ASTM C488 – 05(2010) Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
• ASTM C490/C490M – 11 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
• ASTM C492 – 92(2008) Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
• ASTM C494/C494M – 13 Standard Specification for Chemical Admixtures for Concrete
• ASTM C494/C494M-SP – 13 Especificación Normalizada de Aditivos Químicos para Concreto
• ASTM C495/C495M – 12 Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
• ASTM C496/C496M – 11 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
• ASTM C496/C496M-SP – 11 Método de Ensayo Normalizado para Resistencia a la Tracción indirecta de Especimenes Cilíndricos de Concreto
• ASTM C497 – 13 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
• ASTM C497M – 13 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)
• ASTM C499 – 09 Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile
• ASTM C500/C500M – 07(2011)e1 Standard Test Methods for Asbestos-Cement Pipe
• ASTM C501 – 84(2009) Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
• ASTM C502 – 09 Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
• ASTM C503/C503M – 10 Standard Specification for Marble Dimension Stone
• ASTM C505 – 11 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
• ASTM C505M – 11 Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
• ASTM C506M – 13a Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
• ASTM C506 – 13a Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
• ASTM C507 – 13a Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
• ASTM C507M – 13b Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
• ASTM C508/C508M – 00(2009)e1 Standard Specification for Asbestos-Cement Underdrain Pipe
• ASTM C509 – 06(2011) Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
• ASTM C510 – 05a(2011) Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
• ASTM C511 – 09 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
• ASTM C512/C512M – 10 Standard Test Method for Creep of Concrete in Compression
• ASTM C513 – 11 Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
• ASTM C514 – 04(2009)e1 Standard Specification for Nails for the Application of Gypsum Board
• ASTM C515 – 95(2007) Standard Specification for Chemical-Resistant Ceramic Tower Packings
• ASTM C516 – 08 Standard Specification for Vermiculite Loose Fill Thermal Insulation
• ASTM C518 – 10 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
• ASTM C520 – 04(2010) Standard Test Methods for Density of Granular Loose Fill Insulations
• ASTM C522 – 03(2009)e1 Standard Test Method for Airflow Resistance of Acoustical Materials
• ASTM C530 – 12 Standard Specification for Structural Clay Nonloadbearing Screen Tile
• ASTM C531 – 00(2012) Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
• ASTM C533 – 13 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
• ASTM C534/C534M – 11 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
• ASTM C535 – 12 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
• ASTM C536 – 83(2009) Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
• ASTM C537 – 87(2009) Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
• ASTM C538 – 83(2009) Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels
• ASTM C539 – 84(2011) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
• ASTM C541/C541M – 98(2011)e1 Standard Specification for Linings for Asbestos-Cement Pipe
• ASTM C542 – 05(2011) Standard Specification for Lock-Strip Gaskets
• ASTM C544 – 03(2008) Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain
• ASTM C545 – 97(2007) Standard Classification of Zircon Refractories
• ASTM C547 – 12 Standard Specification for Mineral Fiber Pipe Insulation
• ASTM C549 – 06(2012) Standard Specification for Perlite Loose Fill Insulation
• ASTM C550 – 10 Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
• ASTM C551/C551M – 07(2011)e1 Standard Specification for Asbestos-Cement Fiberboard Insulating Panels
• ASTM C552 – 12b Standard Specification for Cellular Glass Thermal Insulation
• ASTM C553 – 11 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
• ASTM C554 – 93(2011) Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method
• ASTM C557 – 03(2009)e1 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
• ASTM C559 – 90(2010) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
• ASTM C560 – 88(2010)e1 Standard Test Methods for Chemical Analysis of Graphite
• ASTM C561 – 91(2010)e1 Standard Test Method for Ash in a Graphite Sample
• ASTM C562 – 91(2010)e1 Standard Test Method for Moisture in a Graphite Sample
• ASTM C563 – 13 Standard Test Method for Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength
• ASTM C564 – 12 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
• ASTM C565 – 93(2010)e1 Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
• ASTM C566 – 13 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
• ASTM C567/C567M – 11 Standard Test Method for Determining Density of Structural Lightweight Concrete
• ASTM C567/C567M-SP – 11 Método Normalizado de Ensayo para la Determinación de la Densidad de Concreto Estructural Liviano
• ASTM C568/C568M – 10 Standard Specification for Limestone Dimension Stone
• ASTM C577 – 07e2 Standard Test Method for Permeability of Refractories
• ASTM C578 – 12b Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
• ASTM C579 – 01(2012) Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
• ASTM C580 – 02(2012) Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
• ASTM C581 – 03(2008)e1 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
• ASTM C582 – 09 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
• ASTM C583 – 10 Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
• ASTM C584 – 81(2011) Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
• ASTM C585 – 10 Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
• ASTM C586 – 11 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
• ASTM C587 – 04(2009) Standard Specification for Gypsum Veneer Plaster
• ASTM C591 – 12b Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
• ASTM C592 – 12 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
• ASTM C593 – 06(2011) Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
• ASTM C595/C595M – 13 Standard Specification for Blended Hydraulic Cements
• ASTM C595/C595M-SP – 13 Especificación Normalizada para Cementos Adicionados Hidráulicos
• ASTM C596 – 09 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
• ASTM C597 – 09 Standard Test Method for Pulse Velocity Through Concrete
• ASTM C598 – 93(2008) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
• ASTM C600 – 85(2010) Standard Test Method of Thermal Shock Test on Glass Pipe
• ASTM C601 – 85(2010) Standard Test Method for Pressure Test on Glass Pipe
• ASTM C602 – 12 Standard Specification for Agricultural Liming Materials
• ASTM C603 – 04(2008) Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
• ASTM C604 – 02(2012) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
• ASTM C607 – 88(2010)e1 Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
• ASTM C609 – 07 Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
• ASTM C610 – 11 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
• ASTM C611 – 98(2010)e1 Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
• ASTM C612 – 10 Standard Specification for Mineral Fiber Block and Board Thermal Insulation
• ASTM C613/C613M – 97(2008) Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
• ASTM C614 – 10(2011)e1 Standard Test Method for Alkali Resistance of Porcelain Enamels
• ASTM C615/C615M – 11 Standard Specification for Granite Dimension Stone
• ASTM C616/C616M – 10 Standard Specification for Quartz-Based Dimension Stone
• ASTM C617/C617M – 12 Standard Practice for Capping Cylindrical Concrete Specimens
• ASTM C618 – 12a Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
• ASTM C618-SP – 12a Especificación normalizada para Ceniza Volante de Carbón y Puzolana Natural en Crudo o Calcinada para Uso en Concreto
• ASTM C621 – 09 Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
• ASTM C623 – 92(2010) Standard Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Glass and Glass-Ceramics by Resonance
• ASTM C625 – 95(2010) Standard Practice for Reporting Irradiation Results on Graphite
• ASTM C627 – 10 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
• ASTM C629/C629M – 10 Standard Specification for Slate Dimension Stone
• ASTM C631 – 09 Standard Specification for Bonding Compounds for Interior Gypsum Plastering
• ASTM C632 – 88(2011)e1 Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling
• ASTM C633 – 01(2008) Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
• ASTM C634 – 11 Standard Terminology Relating to Building and Environmental Acoustics
• ASTM C635/C635M – 13 Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
• ASTM C636/C636M – 13 Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
• ASTM C637 – 09 Standard Specification for Aggregates for Radiation-Shielding Concrete
• ASTM C638 – 09 Standard Descriptive Nonmenclature of Constituents of Aggregates for Radiation-Shielding Concrete
• ASTM C639 – 01(2011) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
• ASTM C641 – 09 Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates
• ASTM C642 – 13 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
• ASTM C645 – 11a Standard Specification for Nonstructural Steel Framing Members
• ASTM C647 – 08 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
• ASTM C648 – 04(2009) Standard Test Method for Breaking Strength of Ceramic Tile
• ASTM C650 – 04(2009) Standard Test Method for Resistance of Ceramic Tile to Chemical Substances
• ASTM C651 – 11 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
• ASTM C652 – 12a Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
• ASTM C653 – 97(2012) Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
• ASTM C654 – 11 Standard Specification for Porous Concrete Pipe
• ASTM C654M – 11 Standard Specification for Porous Concrete Pipe (Metric)
• ASTM C655 – 12b Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
• ASTM C655M – 12b Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
• ASTM C656 – 07(2013) Standard Specification for Structural Insulating Board, Calcium Silicate
• ASTM C657 – 93(2008) Standard Test Method for D-C Volume Resistively of Glass
• ASTM C658 – 98(2012) Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile
• ASTM C659 – 90(2008) Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels
• ASTM C660 – 81(2010) Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling (www.tecert.com)
• ASTM C661 – 06(2011) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
• ASTM C662 – 70(2010) Standard Specification for Impervious Graphite Pipe and Threading
• ASTM C663 – 98(2008) Standard Specification for Asbestos-Cement Storm Drain Pipe
• ASTM C664 – 10 Standard Test Methods for Thickness of Diffusion Coating
• ASTM C665 – 12 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
• ASTM C666/C666M – 03(2008) Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
• ASTM C667 – 09 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
• ASTM C668 – 98(2008) Standard Specification for Asbestos-Cement Transmission Pipe
• ASTM C670 – 10 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
• ASTM C672/C672M – 12 Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
• ASTM C673 – 97(2008) Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
• ASTM C674 – 13 Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
• ASTM C675 – 91(2011) Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers
• ASTM C676 – 04(2009) Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
• ASTM C679 – 03(2009)e1 Standard Test Method for Tack-Free Time of Elastomeric Sealants
• ASTM C680 – 10 Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
• ASTM C681 – 03(2009) Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
• ASTM C685/C685M – 11 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
• ASTM C686 – 90(2011)e1 Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
• ASTM C687 – 12 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
• ASTM C688 – 08 Standard Specification for Functional Additions for Use in Hydraulic Cements
• ASTM C689 – 09 Standard Test Method for Modulus of Rupture of Unfired Clays
• ASTM C690 – 09 Standard Test Method for Particle Size Distribution of Alumina or Quartz by Electric Sensing Zone Technique
• ASTM C692 – 13 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
• ASTM C693 – 93(2008) Standard Test Method for Density of Glass by Buoyancy
• ASTM C694 – 90a(2011)e1 Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
• ASTM C695 – 91(2010) Standard Test Method for Compressive Strength of Carbon and Graphite
• ASTM C696 – 11 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
• ASTM C697 – 10 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
• ASTM C698 – 10 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)
• ASTM C700 – 13 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
• ASTM C702/C702M – 11 Standard Practice for Reducing Samples of Aggregate to Testing Size
• ASTM C703 – 72(2011)e1 Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
• ASTM C704/C704M – 12 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
• ASTM C706 – 02(2008)e1 Standard Specification for Limestone for Animal Feed Use
• ASTM C708 – 08 Specification for Nuclear-Grade Beryllium Oxide Powder
• ASTM C709 – 09 Standard Terminology Relating to Manufactured Carbon and Graphite
• ASTM C711 – 03(2009) Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
• ASTM C712 – 03(2009) Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
• ASTM C714 – 05(2010) Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
• ASTM C715 – 90(2011)e1 Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
• ASTM C716 – 06(2011) Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
• ASTM C717 – 12b Standard Terminology of Building Seals and Sealants
• ASTM C719 – 93(2010) Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
• ASTM C722 – 04(2012) Standard Specification for Chemical-Resistant Monolithic Floor Surfacings
• ASTM C723 – 98(2012) Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile
• ASTM C724 – 91(2010) Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
• ASTM C725 – 90(2008) Standard Specification for Semidense Mineral Fiber Siding
• ASTM C726 – 12 Standard Specification for Mineral Wool Roof Insulation Board
• ASTM C727 – 12 Standard Practice for Installation and Use of Reflective Insulation in Building Constructions
• ASTM C728 – 13 Standard Specification for Perlite Thermal Insulation Board
• ASTM C729 – 11 Standard Test Method for Density of Glass by the Sink-Float Comparator
• ASTM C730 – 98(2008) Standard Test Method for Knoop Indentation Hardness of Glass
• ASTM C731 – 00(2010) Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
• ASTM C732 – 06(2012) Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
• ASTM C734 – 06(2012) Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
• ASTM C735 – 04(2009) Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers
• ASTM C736 – 12 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
• ASTM C737 – 08 Standard Specification for Limestone for Dusting of Coal Mines
• ASTM C738 – 94(2011) Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
• ASTM C739 – 11 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
• ASTM C740/C740M – 97(2009) Standard Practice for Evacuated Reflective Insulation In Cryogenic Service
• ASTM C743 – 87(2009) Standard Test Method for Continuity of Porcelain Enamel Coatings
• ASTM C744 – 11 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
• ASTM C746 – 90(2008) Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading
• ASTM C747 – 93(2010)e1 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
• ASTM C748 – 98(2010)e1 Standard Test Method for Rockwell Hardness of Graphite Materials
• ASTM C749 – 08(2010)e1 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
• ASTM C750 – 09 Standard Specification for Nuclear-Grade Boron Carbide Powder
• ASTM C751 – 07(2012) Standard Specification for Nuclear-Grade Boron Carbide Pellets
• ASTM C752 – 13 Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy
• ASTM C753 – 04(2009) Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder
• ASTM C754 – 11 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
• ASTM C755 – 10 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
• ASTM C756 – 87(2011)e1 Standard Test Method for Cleanability of Surface Finishes
• ASTM C757 – 06(2011)e1 Standard Specification for Nuclear-Grade Plutonium Dioxide Powder, Sinterable
• ASTM C758 – 04(2010) Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
• ASTM C759 – 10 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
• ASTM C760 – 90(2007) Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
• ASTM C761 – 11 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
• ASTM C764 – 11 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
• ASTM C765 – 97(2011) Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
• ASTM C767 – 93(2009) Standard Test Method for Thermal Conductivity of Carbon Refractories
• ASTM C769 – 09 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining Young’s Modulus
• ASTM C770 – 98(2008) Standard Test Method for Measurement of Glass Stress—Optical Coefficient
• ASTM C771 – 03(2009) Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
• ASTM C772 – 03(2009) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
• ASTM C773 – 88(2011) Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
• ASTM C774 – 88(2011)e1 Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing
• ASTM C776 – 06(2011) Standard Specification for Sintered Uranium Dioxide Pellets
• ASTM C777 – 04(2009) Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass
• ASTM C778 – 12 Standard Specification for Standard Sand
• ASTM C779/C779M – 12 Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
• ASTM C780 – 12a Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
• ASTM C781 – 08 Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components
• ASTM C782 – 13 Standard Test Method for Softness of Preformed Tape Sealants
• ASTM C783 – 85(2010)e1 Standard Practice for Core Sampling of Graphite Electrodes
• ASTM C784 – 05(2012) Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
• ASTM C785 – 08 Standard Specification for Nuclear-Grade Aluminum Oxide Pellets
• ASTM C786/C786M – 10 Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods
• ASTM C787 – 11 Standard Specification for Uranium Hexafluoride for Enrichment
• ASTM C788 – 03(2009) Standard Specification for Nuclear-Grade Uranyl Nitrate Solution or Crystals
• ASTM C791 – 12 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
• ASTM C792 – 04(2008) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
• ASTM C793 – 05(2010) Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
• ASTM C794 – 10 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
• ASTM C795 – 08(2013) Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
• ASTM C796/C796M – 12 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
• ASTM C799 – 12 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions
• ASTM C800 – 08 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
• ASTM C802 – 09a Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
• ASTM C803/C803M – 03(2010) Standard Test Method for Penetration Resistance of Hardened Concrete
• ASTM C805/C805M – 13 Standard Test Method for Rebound Number of Hardened Concrete
• ASTM C806 – 12 Standard Test Method for Restrained Expansion of Expansive Cement Mortar
• ASTM C807 – 08 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
• ASTM C808 – 75(2010)e1 Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
• ASTM C809 – 13 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets
• ASTM C810 – 90(2011)e1 Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
• ASTM C813 – 90(2009) Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
• ASTM C816 – 85(2010)e1 Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method
• ASTM C821 – 09 Standard Specification for Lime for Use with Pozzolans
• ASTM C822 – 13 Standard Terminology Relating to Concrete Pipe and Related Products
• ASTM C823/C823M – 12 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
• ASTM C824 – 91(2010) Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
• ASTM C825 – 06(2011) Standard Specification for Precast Concrete Barriers
• ASTM C827/C827M – 10 Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
• ASTM C828 – 11 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
• ASTM C829 – 81(2010) Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
• ASTM C830 – 00(2011) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
• ASTM C831 – 98(2008) Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
• ASTM C832 – 00(2010) Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load
• ASTM C833 – 13 Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets
• ASTM C834 – 10 Standard Specification for Latex Sealants
• ASTM C835 – 06 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C
• ASTM C836/C836M – 12 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
• ASTM C837 – 09 Standard Test Method for Methylene Blue Index of Clay
• ASTM C838 – 96(2010)e1 Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
• ASTM C839 – 82(2010) Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
• ASTM C840 – 11 Standard Specification for Application and Finishing of Gypsum Board
• ASTM C841 – 03(2008)e1 Standard Specification for Installation of Interior Lathing and Furring
• ASTM C842 – 05(2010)e1 Standard Specification for Application of Interior Gypsum Plaster
• ASTM C843 – 99(2012) Standard Specification for Application of Gypsum Veneer Plaster
• ASTM C844 – 04(2010) Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
• ASTM C845/C845M – 12 Standard Specification for Expansive Hydraulic Cement
• ASTM C845/C845M-SP – 12 Especificación Normalizada para Cemento Hidráulico Expansivo
• ASTM C846 – 94(2009) Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
• ASTM C847 – 12 Standard Specification for Metal Lath
• ASTM C848 – 88(2011) Standard Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance
• ASTM C849 – 88(2011) Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
• ASTM C852 – 09 Standard Guide for Design Criteria for Plutonium Gloveboxes
• ASTM C856 – 11 Standard Practice for Petrographic Examination of Hardened Concrete
• ASTM C857 – 13 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
• ASTM C858 – 10e1 Standard Specification for Underground Precast Concrete Utility Structures
• ASTM C859 – 10b Standard Terminology Relating to Nuclear Materials
• ASTM C860 – 10 Standard Test Method for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
• ASTM C861 – 93(2010) Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
• ASTM C862 – 02(2008) Standard Practice for Preparing Refractory Concrete Specimens by Casting
• ASTM C863 – 00(2010) Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
• ASTM C864 – 05(2011) Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
• ASTM C865 – 02(2007) Standard Practice for Firing Refractory Concrete Specimens
• ASTM C866 – 11 Standard Test Method for Filtration Rate of Ceramic Whiteware Clays
• ASTM C867 – 94(2007) Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method)
• ASTM C868 – 02(2012) Standard Test Method for Chemical Resistance of Protective Linings
• ASTM C869/C869M – 11 Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete
• ASTM C870 – 11 Standard Practice for Conditioning of Thermal Insulating Materials
• ASTM C871 – 11e1 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
• ASTM C872 – 10 Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces
• ASTM C873/C873M – 10a Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
• ASTM C874 – 11a Standard Test Method for Rotary Slag Testing of Refractory Materials
• ASTM C875 – 98(2008) Standard Specification for Asbestos-Cement Conduit
• ASTM C876 – 09 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
• ASTM C877 – 08 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
• ASTM C877M – 02(2009) Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
• ASTM C878/C878M – 09 Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
• ASTM C879 – 03(2009) Standard Test Methods for Release Papers Used With Preformed Tape Sealants
• ASTM C880/C880M – 09 Standard Test Method for Flexural Strength of Dimension Stone
• ASTM C881/C881M – 10 Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
• ASTM C882/C882M – 12 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
• ASTM C884/C884M – 98(2010) Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
• ASTM C885 – 87(2012) Standard Test Method for Young’s Modulus of Refractory Shapes by Sonic Resonance
• ASTM C886 – 98(2010)e1 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
• ASTM C887 – 05(2010) Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
• ASTM C888 – 03(2008) Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
• ASTM C889 – 11 Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
• ASTM C890 – 13 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
• ASTM C891 – 11 Standard Practice for Installation of Underground Precast Concrete Utility Structures
• ASTM C892 – 10 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation
• ASTM C895 – 87(2009) Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile
• ASTM C896 – 11 Standard Terminology Relating to Clay Products
• ASTM C897 – 05(2009) Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
• ASTM C898/C898M – 09 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course
• ASTM C899 – 79(2007) Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials (COMMITTEE C-8 SUPPLEMENT TO E 380)
• ASTM C900 – 13 Standard Test Method for Pullout Strength of Hardened Concrete
• ASTM C901 – 10 Standard Specification for Prefabricated Masonry Panels
• ASTM C902 – 12a Standard Specification for Pedestrian and Light Traffic Paving Brick
• ASTM C903 – 10 Standard Practice for Preparing Refractory Castable Specimens by Cold Gunning
• ASTM C904 – 01(2012) Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials
• ASTM C905 – 01(2012) Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
• ASTM C907 – 03(2012) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
• ASTM C908 – 00(2011) Standard Test Method for Yield Strength of Preformed Tape Sealants
• ASTM C909 – 93(2010) Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes
• ASTM C910 – 06(2011) Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
• ASTM C911 – 06(2011) Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses
• ASTM C912 – 93(2008)e1 Standard Practice for Designing a Process for Cleaning Technical Glasses
• ASTM C913 – 08 Standard Specification for Precast Concrete Water and Wastewater Structures
• ASTM C914 – 09 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
• ASTM C915 – 79(2010) Standard Specification for Precast Reinforced Concrete Crib Wall Members
• ASTM C916 – 85(2007) Standard Specification for Adhesives for Duct Thermal Insulation
• ASTM C917 – 05(2011) Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source
• ASTM C918/C918M – 07 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
• ASTM C919 – 12 Standard Practice for Use of Sealants in Acoustical Applications
• ASTM C920 – 11 Standard Specification for Elastomeric Joint Sealants
• ASTM C921 – 10 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
• ASTM C922 – 08 Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets
• ASTM C923 – 08 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals
• ASTM C923M – 08b Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)
• ASTM C924 – 02(2009) Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
• ASTM C924M – 02(2009) Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
• ASTM C925 – 09 Standard Guide for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders
• ASTM C926 – 12a Standard Specification for Application of Portland Cement-Based Plaster
• ASTM C927 – 80(2009) Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
• ASTM C928/C928M – 09 Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
• ASTM C929 – 94(2009) Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
• ASTM C930 – 12 Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
• ASTM C932 – 06 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering
• ASTM C933 – 11 Standard Specification for Welded Wire Lath
• ASTM C935 – 13 Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast
• ASTM C936/C936M – 12 Standard Specification for Solid Concrete Interlocking Paving Units
• ASTM C937 – 10 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
• ASTM C938 – 10 Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
• ASTM C939 – 10 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
• ASTM C940 – 10a Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
• ASTM C941 – 10 Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
• ASTM C942 – 10 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
• ASTM C943 – 10 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
• ASTM C944/C944M – 12 Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
• ASTM C945 – 05(2012) Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
• ASTM C946 – 10 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls
• ASTM C947 – 03(2009) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
• ASTM C948 – 81(2009) Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
• ASTM C949 – 80(2012) Standard Test Method for Porosity? in? Vitreous? Whitewares? by? Dye? Penetration
• ASTM C950/C950M – 08(2012) Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
• ASTM C952 – 12 Standard Test Method for Bond Strength of Mortar to Masonry Units
• ASTM C953 – 10 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
• ASTM C954 – 11 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
• ASTM C955 – 11c Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
• ASTM C956 – 04(2010) Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
• ASTM C957/C957M – 10 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
• ASTM C958 – 92(2007) Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
• ASTM C961 – 06(2011) Standard Test Method for Lap Shear Strength of Sealants
• ASTM C963 – 00(2012) Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
• ASTM C964 – 07(2012) Standard Guide for Lock-Strip Gasket Glazing
• ASTM C965 – 96(2012) Standard Practice for Measuring Viscosity of Glass Above the Softening Point
• ASTM C966 – 98(2008) Standard Guide for Installing Asbestos-Cement Nonpressure Pipe
• ASTM C967 – 13 Standard Specification for Uranium Ore Concentrate
• ASTM C968 – 12 Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets
• ASTM C969 – 02(2009) Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
• ASTM C969M – 02(2009) Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
• ASTM C972 – 00(2011) Standard Test Method for Compression-Recovery of Tape Sealant
• ASTM C973 – 87(2009) Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
• ASTM C974 – 87(2009) Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
• ASTM C975 – 87(2009) Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
• ASTM C977 – 10 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
• ASTM C978 – 04(2009) Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
• ASTM C979/C979M – 10 Standard Specification for Pigments for Integrally Colored Concrete
• ASTM C980 – 10 Standard Specification for Industrial Chimney Lining Brick
• ASTM C981 – 05(2013) Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
• ASTM C985 – 04(2010) Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
• ASTM C985M – 04(2010) Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)
• ASTM C987 – 10 Standard Test Method for Vapor Attack on Refractories for Furnace Superstructures
• ASTM C989/C989M – 12a Standard Specification for Slag Cement for Use in Concrete and Mortars
• ASTM C989/C989M-SP – 12a Especificación Normalizada para Cemento de Escoria para Uso en Concreto y Morteros
• ASTM C990 – 09 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
• ASTM C990M – 09 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
• ASTM C991 – 08e1 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
• ASTM C992 – 11 Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks
• ASTM C993 – 97(2012) Standard Guide for In-Plant Performance Evaluation of Automatic Pedestrian SNM Monitors
• ASTM C996 – 10 Standard Specification for Uranium Hexafluoride Enriched to Less Than 5 % 235U
• ASTM C998 – 05(2010)e1 Standard Practice for Sampling Surface Soil for Radionuclides
• ASTM C999 – 05(2010)e1 Standard Practice for Soil Sample Preparation for the Determination of Radionuclides
• ASTM C1000 – 11 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry
• ASTM C1001 – 11 Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy
• ASTM C1002 – 07 Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
• ASTM C1005 – 10 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
• ASTM C1006 – 07 Standard Test Method for Splitting Tensile Strength of Masonry Units
• ASTM C1007 – 11a Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
• ASTM C1008 – 99(2008) Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets—Fast Reactor Fuel
• ASTM C1009 – 13a Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry
• ASTM C1012/C1012M – 13 Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
• ASTM C1014 – 08(2013) Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
• ASTM C1015 – 06(2011)e1 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
• ASTM C1016 – 02(2008)e1 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
• ASTM C1017/C1017M – 07 Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
• ASTM C1017/C1017M-SP – 07 Especificación Normalizada para Aditivos Químicos para Uso en la Producción de Concreto Fluido
• ASTM C1019 – 11 Standard Test Method for Sampling and Testing Grout
• ASTM C1021 – 08 Standard Practice for Laboratories Engaged in Testing of Building Sealants
• ASTM C1022 – 05(2010)e1 Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate
• ASTM C1023 – 10 Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards
• ASTM C1025 – 91(2010)e1 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
• ASTM C1026 – 13 Standard Test Method for Measuring the Resistance of Ceramic and Glass Tile to Freeze-Thaw Cycling
• ASTM C1027 – 09 Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
• ASTM C1028 – 07e1 Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
• ASTM C1029 – 13 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
• ASTM C1030 – 10 Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry
• ASTM C1031 – 11 Standard Specification for Nuclear-Grade Aluminum Oxide Powder
• ASTM C1032 – 06(2011) Standard Specification for Woven Wire Plaster Base
• ASTM C1036 – 11e1 Standard Specification for Flat Glass
• ASTM C1037 – 08 Standard Practice for Inspection of Underground Precast Concrete Utility Structures
• ASTM C1038/C1038M – 10 Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
• ASTM C1039 – 85(2010)e1 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
• ASTM C1040/C1040M – 08 Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
• ASTM C1041 – 10 Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers
• ASTM C1043 – 06(2010) Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
• ASTM C1044 – 12 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
• ASTM C1045 – 07 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
• ASTM C1046 – 95(2007) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
• ASTM C1047 – 10a Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
• ASTM C1048 – 12e1 Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass
• ASTM C1052 – 01(2007) Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride
• ASTM C1053 – 00(2010) Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications
• ASTM C1054 – 03(2008) tandard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
• ASTM C1055 – 03(2009) Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries
• ASTM C1057 – 03(2010) Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using A Mathematical Model and Thermesthesiometer
• ASTM C1058/C1058M – 10 Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
• ASTM C1059/C1059M – 99(2008) Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete
• ASTM C1060 – 11a Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
• ASTM C1062 – 00(2008) Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
• ASTM C1063 – 12c Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
• ASTM C1064/C1064M – 12 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
• ASTM C1065 – 08 Standard Specification for Nuclear-Grade Zirconium Oxide Powder
• ASTM C1066 – 09 Standard Specification for Nuclear Grade Zirconium Oxide Pellets
• ASTM C1067 – 12 Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials
• ASTM C1068 – 03(2011) Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
• ASTM C1069 – 09 Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
• ASTM C1070 – 01(2007) Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
• ASTM C1071 – 12 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
• ASTM C1072 – 13 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
• ASTM C1073 – 12 Standard Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali
• ASTM C1074 – 11 Standard Practice for Estimating Concrete Strength by the Maturity Method
• ASTM C1075 – 10 Standard Practices for Sampling Uranium-Ore Concentrate
• ASTM C1076 – 09 Standard Specification for Nuclear Grade Hafnium Oxide Pellets
• ASTM C1077 – 13a Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
• ASTM C1080 – 98(2008) Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers
• ASTM C1081 – 98(2008) Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers
• ASTM C1082 – 98(2008) Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill
• ASTM C1083 – 06(2011) Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
• ASTM C1084 – 10 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
• ASTM C1086 – 09 Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation
• ASTM C1087 – 00(2011) Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
• ASTM C1088 – 12 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
• ASTM C1089 – 13 Standard Specification for Spun Cast Prestressed Concrete Poles
• ASTM C1090 – 10 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
• ASTM C1091 – 03a(2008) Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
• ASTM C1093 – 12 Standard Practice for Accreditation of Testing Agencies for Masonry
• ASTM C1096/C1096M – 07(2011)e1 Standard Test Method for Determination of Wood Fiber in Asbestos Cement
• ASTM C1097 – 07(2012) Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Pavements
• ASTM C1098 – 08 Standard Specification for Nuclear-Grade Hafnium Oxide Powder
• ASTM C1099 – 07(2012) Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
• ASTM C1101/C1101M – 06(2012) Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
• ASTM C1103 – 03(2009) Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
• ASTM C1103M – 03(2009) Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
• ASTM C1104/C1104M – 13 Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
• ASTM C1105 – 08a Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
• ASTM C1106 – 00(2012) Standard Test Methods for Chemical Resistance and Physical Properties of Carbon Brick
• ASTM C1107/C1107M – 11 Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
• ASTM C1108 – 12 Standard Test Method for Plutonium by Controlled-Potential Coulometry
• ASTM C1109 – 10 Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry
• ASTM C1110 – 03(2008) Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
• ASTM C1111 – 10 Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
• ASTM C1112 – 99(2005) Standard Guide for Application of Radiation Monitors to the Control and Physical Security of Special Nuclear Material
• ASTM C1113/C1113M – 09 Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
• ASTM C1114 – 06 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
• ASTM C1115 – 06(2011) Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
• ASTM C1116/C1116M – 10a Standard Specification for Fiber-Reinforced Concrete
• ASTM C1119/C1119M – 90(2009)e1 Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
• ASTM C1120/C1120M – 98(2011)e1 Standard Test Method for Wash Test of Asbestos
• ASTM C1121/C1121M – 04(2009)e1 Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
• ASTM C1122/C1122M – 90(2009)e1 Standard Test Method for Wet Volume of Asbestos
• ASTM C1123/C1123M – 90(2009)e1 Standard Test Method for Compressibility and Recovery of Asbestos
• ASTM C1124/C1124M – 90(2009)e1 Standard Test Method for Kerosene Retention of Asbestos
• ASTM C1125 – 89(2009) Standard Test Method for Penetration Index of Asbestos
• ASTM C1126 – 12a Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
• ASTM C1127 – 01(2009) Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
• ASTM C1128 – 01(2008) Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
• ASTM C1129 – 12 Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
• ASTM C1130 – 07(2012) Standard Practice for Calibrating Thin Heat Flux Transducers
• ASTM C1131 – 10e1 Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
• ASTM C1133/C1133M – 10 Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning
• ASTM C1134 – 90(2012)e1 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
• ASTM C1135 – 00(2011) Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
• ASTM C1136 – 12 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
• ASTM C1138M – 12 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
• ASTM C1139 – 08 Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications
• ASTM C1140/C1140M – 11 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
• ASTM C1141/C1141M – 08 Standard Specification for Admixtures for Shotcrete
• ASTM C1142 – 95(2007) Standard Specification for Extended Life Mortar for Unit Masonry
• ASTM C1144 – 89(2011) Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms
• ASTM C1145 – 06(2013) Standard Terminology of Advanced Ceramics
• ASTM C1146 – 09 Standard Guide for Prefabricated Panel and H–bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
• ASTM C1147 – 01(2012) Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
• ASTM C1148 – 92a(2008) Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar
• ASTM C1149 – 11 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
• ASTM C1152/C1152M – 04(2012)e1 Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
• ASTM C1153 – 10 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
• ASTM C1154 – 06(2011) Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products
• ASTM C1155 – 95(2007) Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
• ASTM C1156 – 03(2011) Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
• ASTM C1157/C1157M – 11 Standard Performance Specification for Hydraulic Cement
• ASTM C1157/C1157M-SP – 11 Especificación Normalizada de Desempe?o para Cemento Hidráulico
• ASTM C1159 – 98(2012) Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
• ASTM C1160 – 97(2012) Standard Specification for Chemical-Resistant Carbon Brick
• ASTM C1161 – 02c(2008)e1 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
• ASTM C1162/C1162M – 90(2009)e1 Standard Test Method for Loose Density of Asbestos
• ASTM C1163 – 08 Standard Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride
• ASTM C1164 – 92(2009) Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
• ASTM C1165 – 12 Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode
• ASTM C1166 – 06(2011) Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
• ASTM C1167 – 11 Standard Specification for Clay Roof Tiles
• ASTM C1168 – 08 Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis
• ASTM C1169 – 97(2012) Standard Guide for Laboratory Evaluation of Automatic Pedestrian SNM Monitor Performance
• ASTM C1170/C1170M – 08 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
• ASTM C1171 – 05(2011) Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
• ASTM C1172 – 09e1 Standard Specification for Laminated Architectural Flat Glass
• ASTM C1173 – 10e1 Standard Specification for Flexible Transition Couplings for Underground Piping Systems
• ASTM C1174 – 07(2013) Standard Practice for Prediction of the Long-Term Behavior of Materials, Including Waste Forms, Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste
• ASTM C1175 – 99a(2010) Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics
• ASTM C1176/C1176M – 08 Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
• ASTM C1177/C1177M – 08 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
• ASTM C1178/C1178M – 11 Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel
• ASTM C1179 – 91(2010)e1 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
• ASTM C1180 – 10 Standard Terminology of Mortar and Grout for Unit Masonry
• ASTM C1181 – 00(2012) Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
• ASTM C1182 – 09 Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
• ASTM C1183/C1183M – 13 Standard Test Method for Extrusion Rate of Elastomeric Sealants
• ASTM C1184 – 13 Standard Specification for Structural Silicone Sealants
• ASTM C1185 – 08(2012) Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
• ASTM C1186 – 08(2012) Standard Specification for Flat Fiber-Cement Sheets
• ASTM C1187 – 07 Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks
• ASTM C1188 – 04(2011) Standard Guide for Establishing a Quality Assurance Program for Uranium Conversion Facilities
• ASTM C1189 – 11 Standard Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors
• ASTM C1190 – 95(2010) Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
• ASTM C1193 – 13 Standard Guide for Use of Joint Sealants
• ASTM C1194 – 03(2011) Standard Test Method for Compressive Strength of Architectural Cast Stone
• ASTM C1195 – 03(2011) Standard Test Method for Absorption of Architectural Cast Stone
• ASTM C1196 – 09 Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
• ASTM C1197 – 09 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
• ASTM C1198 – 09 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Sonic Resonance
• ASTM C1199 – 12 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
• ASTM C1201/C1201M – 09 Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
• ASTM C1202 – 12 Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
• ASTM C1203 – 04(2009) Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
• ASTM C1204 – 02(2008)e1 Standard Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration
• ASTM C1205 – 07(2012) Standard Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry
• ASTM C1206 – 02(2010) Standard Test Method for Plutonium by Iron (II)/Chromium (VI) Amperometric Titration
• ASTM C1207 – 10 Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
• ASTM C1208/C1208M – 11 Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
• ASTM C1210 – 12 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
• ASTM C1211 – 02(2008) Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
• ASTM C1212 – 98(2010) Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids
• ASTM C1214 – 02(2009) Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
• ASTM C1214M – 02(2009) Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
• ASTM C1215 – 92(2012)e1 Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
• ASTM C1216/C1216M – 13 Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
• ASTM C1217 – 00(2012) Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials
• ASTM C1218/C1218M – 99(2008) Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
• ASTM C1218/C1218M-SP – 99(2008) Método de Ensayo Normalizado para Cloruros Solubles en Agua en Mortero y Concreto
• ASTM C1219 – 05(2009) Standard Test Methods for Arsenic in Uranium Hexafluoride
• ASTM C1220 – 10 Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste
• ASTM C1221 – 10 Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
• ASTM C1222 – 09 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
• ASTM C1223 – 09 Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
• ASTM C1224 – 11 Standard Specification for Reflective Insulation for Building Applications
• ASTM C1225 – 08(2012) Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates
• ASTM C1227 – 12 Standard Specification for Precast Concrete Septic Tanks
• ASTM C1228 – 96(2009) Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
• ASTM C1229 – 94(2009) Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)
• ASTM C1230 – 96(2009) Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
• ASTM C1231/C1231M – 12 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
• ASTM C1232 – 12 Standard Terminology of Masonry
• ASTM C1233 – 09 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
• ASTM C1234 – 11 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
• ASTM C1236 – 99(2005) Standard Guide for In-Plant Performance Evaluation of Automatic Vehicle SNM Monitors
• ASTM C1237 – 99(2005) Standard Guide to In-Plant Performance Evaluation of Hand-Held SNM Monitors
• ASTM C1238 – 97(2012) Standard Guide for Installation of Walk-Through Metal Detectors
• ASTM C1239 – 07 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
• ASTM C1240 – 12 Standard Specification for Silica Fume Used in Cementitious Mixtures
• ASTM C1240-SP – 12 Especificación Normalizada para Humo de sílice Utilizado en Mezclas Cementicias
• ASTM C1241 – 00(2009) Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
• ASTM C1242 – 12ae1 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
• ASTM C1243 – 93(2009) Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc
• ASTM C1244 – 11 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
• ASTM C1244M – 11 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)
• ASTM C1245/C1245M – 12 Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)
• ASTM C1246 – 00(2012) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
• ASTM C1247 – 09 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
• ASTM C1248 – 08(2012) Standard Test Method for Staining of Porous Substrate by Joint Sealants
• ASTM C1249 – 06a(2010) Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
• ASTM C1250 – 05 Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes
• ASTM C1252 – 06 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
• ASTM C1253 – 93(2009) Standard Test Method for Determining the Outgassing Potential of Sealant Backing
• ASTM C1254 – 13 Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence
• ASTM C1255 – 11 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
• ASTM C1256 – 93(2008) Standard Practice for Interpreting Glass Fracture Surface Features
• ASTM C1257 – 06a(2012) Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
• ASTM C1258 – 08 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
• ASTM C1259 – 08e1 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
• ASTM C1260 – 07 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
• ASTM C1261 – 10 Standard Specification for Firebox Brick for Residential Fireplaces
• ASTM C1262 – 10 Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
• ASTM C1263 – 95(2010) Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
• ASTM C1264 – 11 Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products
• ASTM C1265 – 94(2011) Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
• ASTM C1266 – 02(2011) Standard Test Method for Flow Characteristics of Preformed Tape Sealants
• ASTM C1267 – 11 Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium
• ASTM C1268 – 94(2008) Standard Test Method for Quantitative Determination of Americium 241 in Plutonium by Gamma-Ray Spectrometry
• ASTM C1269 – 97(2012) Standard Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors
• ASTM C1270 – 97(2012) Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
• ASTM C1271 – 99(2012) Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
• ASTM C1272 – 11a Standard Specification for Heavy Vehicular Paving Brick
• ASTM C1273 – 05(2010) Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
• ASTM C1274 – 12 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
• ASTM C1275 – 10 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
• ASTM C1277 – 12 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
• ASTM C1278/C1278M – 07a(2011) Standard Specification for Fiber-Reinforced Gypsum Panel
• ASTM C1279 – 09 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
• ASTM C1280 – 13 Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing
• ASTM C1281 – 03(2009) Standard Specification for Preformed Tape Sealants for Glazing Applications
• ASTM C1282 – 08 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
• ASTM C1283 – 11 Standard Practice for Installing Clay Flue Lining
• ASTM C1284 – 10 Standard Practice for Electrodeposition of the Actinides for Alpha Spectrometry
• ASTM C1285 – 02(2008) Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
• ASTM C1287 – 10 Standard Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry
• ASTM C1288 – 99(2010) Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets
• ASTM C1289 – 13e1 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
• ASTM C1290 – 11 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
• ASTM C1291 – 00a(2010) Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
• ASTM C1292 – 10 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
• ASTM C1293 – 08b Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
• ASTM C1294 – 07(2011) Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
• ASTM C1295 – 13 Standard Test Method for Gamma Energy Emission from Fission and Decay Products in Uranium Hexafluoride and Uranyl Nitrate Solution
• ASTM C1297 – 03(2011) Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
• ASTM C1298 – 95(2007) Standard Guide for Design and Construction of Brick Liners for Industrial Chimneys
• ASTM C1300 – 95(2012) Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method
• ASTM C1301 – 95(2009)e1 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
• ASTM C1302 – 04(2011) Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
• ASTM C1303/C1303M – 12 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
• ASTM C1304 – 08 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
• ASTM C1305 – 08 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
• ASTM C1306 – 08 Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
• ASTM C1307 – 02(2008) Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry
• ASTM C1308 – 08 Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms
• ASTM C1309 – 97(2012) Standard Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors
• ASTM C1311 – 10 Standard Specification for Solvent Release Sealants
• ASTM C1312 – 97(2012) Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory
• ASTM C1313/C1313M – 13 Standard Specification for Sheet Radiant Barriers for Building Construction Applications
• ASTM C1314 – 12 Standard Test Method for Compressive Strength of Masonry Prisms
• ASTM C1315 – 11 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
• ASTM C1316 – 08 Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using 252Cf Shuffler
• ASTM C1318 – 95(2009)e1 Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
• ASTM C1319 – 11 Standard Specification for Concrete Grid Paving Units
• ASTM C1320 – 10 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
• ASTM C1321 – 09 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
• ASTM C1322 – 05b(2010) Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
• ASTM C1323 – 10 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
• ASTM C1324 – 10 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
• ASTM C1325 – 08b Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
• ASTM C1326 – 08e1 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
• ASTM C1327 – 08 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
• ASTM C1328/C1328M – 12 Standard Specification for Plastic (Stucco) Cement
• ASTM C1329/C1329M – 12 Standard Specification for Mortar Cement
• ASTM C1330 – 02(2013) Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
• ASTM C1331 – 01(2012) Standard Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
• ASTM C1332 – 01(2013) Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
• ASTM C1334 – 05(2010) Standard Specification for Uranium Oxides with a 235U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide
• ASTM C1335 – 12 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
• ASTM C1336 – 96(2008) Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions
• ASTM C1337 – 10 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
• ASTM C1338 – 08 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
• ASTM C1339 – 02(2012) Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
• ASTM C1340/C1340M – 10 Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
• ASTM C1341 – 13 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
• ASTM C1343 – 11 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
• ASTM C1344 – 97(2008)e1 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
• ASTM C1345 – 08 Standard Test Method for Analysis of Total and Isotopic Uranium and Total Thorium in Soils by Inductively Coupled Plasma-Mass Spectrometry
• ASTM C1346 – 08 Standard Practice for Dissolution of UF6 from P-10 Tubes
• ASTM C1347 – 08 Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis
• ASTM C1349 – 10 Standard Specification for Architectural Flat Glass Clad Polycarbonate
• ASTM C1350M – 96(2008) Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa?s to Approximately 10 13 Pa?s) by Beam Bending (Metric)
• ASTM C1351M – 96(2012) Standard Test Method for Measurement of Viscosity of Glass Between 104 Pa?s and 108 Pa?s by Viscous Compression of a Solid Right Cylinder [Metric]
• ASTM C1352/C1352M – 09 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
• ASTM C1353 – 09 Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform, Double-Head Abraser
• ASTM C1354/C1354M – 09 Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone
• ASTM C1355/C1355M – 96(2011) Standard Specification for Glass Fiber Reinforced Gypsum Composites
• ASTM C1356 – 07(2012) Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
• ASTM C1357 – 09 Standard Test Methods for Evaluating Masonry Bond Strength
• ASTM C1358 – 13 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures
• ASTM C1359 – 13 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures
• ASTM C1360 – 10 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
• ASTM C1361 – 10 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
• ASTM C1362 – 09 Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete
• ASTM C1363 – 11 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
• ASTM C1364 – 10b Standard Specification for Architectural Cast Stone
• ASTM C1365 – 06(2011) Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
• ASTM C1366 – 04(2009) Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
• ASTM C1367 – 06(2012) Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
• ASTM C1368 – 10 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Strength Testing at Ambient Temperature
• ASTM C1369 – 07 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
• ASTM C1370 – 00(2012) Standard Test Method for Determining Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes
• ASTM C1371 – 04a(2010)e1 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
• ASTM C1372 – 11 Standard Specification for Dry-Cast Segmental Retaining Wall Units
• ASTM C1373/C1373M – 11 Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
• ASTM C1374 – 03(2009) Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
• ASTM C1375 – 00(2009) Standard Guide for Substrates Used in Testing Building Seals and Sealants
• ASTM C1376 – 10 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
• ASTM C1377 – 97(2009) Standard Test Method for Calibration of Surface/Stress Measuring Devices
• ASTM C1378 – 04(2009) Standard Test Method for Determination of Resistance to Staining
• ASTM C1379 – 10 Standard Test Method for Analysis of Urine for Uranium-235 and Uranium-238 Isotopes by Inductively Coupled Plasma-Mass Spectrometry
• ASTM C1380 – 04(2011) Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
• ASTM C1381/C1381M – 97(2008)e1 Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts
• ASTM C1382 – 11 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
• ASTM C1383 – 04(2010) Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
• ASTM C1384 – 12a Standard Specification for Admixtures for Masonry Mortars
• ASTM C1385/C1385M – 10 Standard Practice for Sampling Materials for Shotcrete
• ASTM C1386 – 07 Standard Specification for Precast Autoclaved Aerated Concrete (AAC) Wall Construction Units
• ASTM C1387 – 08 Standard Guide for the Determination of Technetium-99 in Soil
• ASTM C1392 – 00(2009) Standard Guide for Evaluating Failure of Structural Sealant Glazing
• ASTM C1393 – 11 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
• ASTM C1394 – 03(2012) Standard Guide for In-Situ Structural Silicone Glazing Evaluation
• ASTM C1396/C1396M – 13 Standard Specification for Gypsum Board
• ASTM C1397 – 09 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage
• ASTM C1399/C1399M – 10 Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
• ASTM C1400 – 11 Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls
• ASTM C1401 – 09a Standard Guide for Structural Sealant Glazing
• ASTM C1402 – 04(2009) Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
• ASTM C1403 – 12 Standard Test Method for Rate of Water Absorption of Masonry Mortars
• ASTM C1405 – 12 Standard Specification for Glazed Brick (Single Fired, Brick Units)
• ASTM C1407 – 98(2011)e1 Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
• ASTM C1408 – 09 Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
• ASTM C1409 – 12 Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components
• ASTM C1410 – 13 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
• ASTM C1411 – 08 Standard Practice for The Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis
• ASTM C1413 – 05(2011) Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry
• ASTM C1414 – 01(2007) Standard Practice for The Separation of Americium from Plutonium by Ion Exchange
• ASTM C1415 – 01a(2007) Standard Test Method for 238Pu Isotopic Abundance by Alpha Spectrometry
• ASTM C1416 – 04(2009) Standard Test Method for Uranium Analysis in Natural and Waste Water by X-Ray Fluorescence
• ASTM C1417 – 12 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
• ASTM C1417M – 13 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
• ASTM C1419 – 99a(2009) Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young’s Modulus
• ASTM C1421 – 10 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
• ASTM C1422/C1422M – 10 Standard Specification for Chemically Strengthened Flat Glass
• ASTM C1423 – 98(2011) Standard Guide for Selecting Jacketing Materials for Thermal Insulation
• ASTM C1424 – 10 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
• ASTM C1425 – 13 Standard Test Method for Interlaminar Shear Strength of 1–D and 2–D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
• ASTM C1426 – 09 Standard Practices for Verification and Calibration of Polarimeters
• ASTM C1427 – 12 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
• ASTM C1428 – 11 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method
• ASTM C1429 – 99(2009)e1 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
• ASTM C1430 – 07(2011)e1 Standard Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration
• ASTM C1431 – 99(2010)e1 Standard Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal
• ASTM C1432 – 03(2008) Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
• ASTM C1433 – 13a Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
• ASTM C1433M – 13a Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
• ASTM C1435/C1435M – 08 Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
• ASTM C1436 – 08 Standard Specification for Materials for Shotcrete
• ASTM C1437 – 07 Standard Test Method for Flow of Hydraulic Cement Mortar
• ASTM C1438 – 11a Standard Specification for Latex and Powder Polymer Modifiers in Hydraulic Cement Concrete and Mortar
• ASTM C1439 – 08a Standard Test Methods for Evaluating Polymer Modifiers in Mortar and Concrete
• ASTM C1440 – 08(2013) Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
• ASTM C1442 – 11 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
• ASTM C1443 – 99(2010) Standard Specification for Glasses, Portlight, Circular, Fully Tempered
• ASTM C1445 – 07 Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
• ASTM C1446 – 11 Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories
• ASTM C1447/C1447M – 04(2010) Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
• ASTM C1448/C1448M – 05(2010) Standard Specification for Non-Asbestos Fiber-Cement Conduit
• ASTM C1449/C1449M – 05a(2010) Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
• ASTM C1450/C1450M – 04(2010) Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
• ASTM C1451 – 11 Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source
• ASTM C1452 – 00(2006) Standard Specification for Reinforced Autoclaved Aerated Concrete Elements
• ASTM C1453 – 00(2011) Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
• ASTM C1454 – 07 Standard Guide for Pyrophoricity/Combustibility Testing in Support of Pyrophoricity Analyses of Metallic Uranium Spent Nuclear Fuel
• ASTM C1455 – 07 Standard Test Method for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods
• ASTM C1456 – 08 Standard Test Method for the Determination of Uranium or Gadolinium, or Both, in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF)
• ASTM C1457 – 00(2010)e1 Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
• ASTM C1458 – 09e1 Standard Test Method for Nondestructive Assay of Plutonium, Tritium and 241Am by Calorimetric Assay
• ASTM C1459 – 04(2009) Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems
• ASTM C1460 – 12 Standard Specification for Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings Above Ground
• ASTM C1461 – 08(2013) Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use
• ASTM C1462 – 00(2013) Standard Specification for Uranium Metal Enriched to More than 15?% and Less Than 20?% 235U
• ASTM C1463 – 00(2007) Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis
• ASTM C1464 – 06(2011) Standard Specification for Bent Glass
• ASTM C1465 – 08 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
• ASTM C1466 – 00(2012) Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware
• ASTM C1467/C1467M – 00(2012) Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts
• ASTM C1468 – 13 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
• ASTM C1469 – 10 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
• ASTM C1470 – 06(2013) Standard Guide for Testing the Thermal Properties of Advanced Ceramics
• ASTM C1471 – 05 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
• ASTM C1472 – 10 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
• ASTM C1473 – 11 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry
• ASTM C1474 – 00(2011) Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry
• ASTM C1475 – 05(2010)e1 Standard Guide for Determination of Neptunium-237 in Soil
• ASTM C1477 – 08 Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry
• ASTM C1478 – 08 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
• ASTM C1478M – 08a Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric)
• ASTM C1479 – 13 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
• ASTM C1479M – 13 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)
• ASTM C1480/C1480M – 07(2012) Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
• ASTM C1481 – 12 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
• ASTM C1482 – 12 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
• ASTM C1483/C1483M – 04(2009) Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
• ASTM C1484 – 10 Standard Specification for Vacuum Insulation Panels
• ASTM C1485 – 13 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
• ASTM C1486 – 00(2012) Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
• ASTM C1487 – 02(2012) Standard Guide for Remedying Structural Silicone Glazing
• ASTM C1489 – 01(2008)e1 Standard Specification for Lime Putty for Structural Purposes
• ASTM C1490 – 04(2010) Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel
• ASTM C1491 – 11 Standard Specification for Concrete Roof Pavers
• ASTM C1492 – 03(2009) Standard Specification for Concrete Roof Tile
• ASTM C1493 – 09 Standard Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System
• ASTM C1494 – 01(2007) Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
• ASTM C1495 – 07(2012) Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
• ASTM C1496 – 11 Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
• ASTM C1497 – 12 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
• ASTM C1498 – 04a(2010)e1 Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
• ASTM C1499 – 09 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
• ASTM C1500 – 08 Standard Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting
• ASTM C1501 – 09 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
• ASTM C1502 – 09 Standard Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide
• ASTM C1503 – 08(2013) Standard Specification for Silvered Flat Glass Mirror
• ASTM C1504M – 13 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
• ASTM C1504 – 13 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
• ASTM C1505 – 01(2007) Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
• ASTM C1506 – 09 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
• ASTM C1507 – 12 Standard Test Method for Radiochemical Determination of Strontium-90 in Soil
• ASTM C1508 – 01(2011) Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
• ASTM C1509 – 02(2012) Standard Specification for Beaded Process Glass Pipe and Fittings
• ASTM C1510 – 01(2012) Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
• ASTM C1511 – 04(2009) Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Glass Fiber Insulation (Aircraft Type)
• ASTM C1512 – 10 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
• ASTM C1513 – 13 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
• ASTM C1514 – 08 Standard Test Method for Measurement of 235U Fraction Using Enrichment Meter Principle
• ASTM C1515 – 11 Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing
• ASTM C1516 – 05(2011) Standard Practice for Application of Direct-Applied Exterior Finish Systems
• ASTM C1517 – 09 Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
• ASTM C1518 – 04(2009) Standard Specification for Precured Elastomeric Silicone Joint Sealants
• ASTM C1519 – 10 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
• ASTM C1520 – 02(2010) Standard Guide for Paintability of Latex Sealants
• ASTM C1521 – 13 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
• ASTM C1522 – 05(2013) Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
• ASTM C1523 – 10 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
• ASTM C1524 – 02a(2010) Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)
• ASTM C1525 – 04(2009) Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
• ASTM C1526 – 08 Standard Specification for Serpentine Dimension Stone
• ASTM C1527/C1527M – 11 Standard Specification for Travertine Dimension Stone
• ASTM C1528 – 12b Standard Guide for Selection of Dimension Stone
• ASTM C1529 – 06a(2011) Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
• ASTM C1530/C1530M – 04(2010)e1 Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses
• ASTM C1531 – 09 Standard Test Methods for In Situ Measurement Of Masonry Mortar Joint Shear Strength Index
• ASTM C1532/C1532M – 12 Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction
• ASTM C1533 – 08 Standard Guide for General Design Considerations for Hot Cell Equipment
• ASTM C1534 – 12 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
• ASTM C1535 – 05(2011) Standard Practice for Application of Exterior Insulation and Finish Systems Class PI
• ASTM C1536 – 10 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
• ASTM C1539 – 08 Standard Test Method for Determination of Technetium-99 in Uranium Hexafluoride by Liquid Scintillation Counting
• ASTM C1540 – 11 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
• ASTM C1541 – 12 Standard Specification for Shielded Transition Couplings Using Flexible Poly Vinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings
• ASTM C1542/C1542M – 02(2010) Standard Test Method for Measuring Length of Concrete Cores
• ASTM C1543 – 10a Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding
• ASTM C1545 – 02(2012) Practice for Dispersing Pigments and Other Materials into Water-Based Suspensions with a High Intensity Mixer
• ASTM C1546 – 02(2008)e1 Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems
• ASTM C1547 – 02(2007) Standard Classification for Fusion-Cast Refractory Blocks and Shapes
• ASTM C1548 – 02(2012) Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio of Refractory Materials by Impulse Excitation of Vibration
• ASTM C1549 – 09 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
• ASTM C1550 – 12a Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
• ASTM C1552 – 12 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
• ASTM C1553 – 08 Standard Guide for Drying Behavior of Spent Nuclear Fuel
• ASTM C1554 – 11 Standard Guide for Materials Handling Equipment for Hot Cells
• ASTM C1556 – 11a Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
• ASTM C1557 – 03(2008) Standard Test Method for Tensile Strength and Young’s Modulus of Fibers
• ASTM C1558 – 12 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
• ASTM C1559 – 04(2009) Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type)
• ASTM C1560 – 03(2009) Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites
• ASTM C1561 – 10 Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride by Alpha Spectrometry
• ASTM C1562 – 10 Standard Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems
• ASTM C1563 – 08(2013) Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications
• ASTM C1564 – 04(2009) Standard Guide for Use of Silicone Sealants for Protective Glazing Systems
• ASTM C1565 – 09 Standard Test Method for Determination of Pack-Set Index of Portland Cement
• ASTM C1567 – 13 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
• ASTM C1568 – 08 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
• ASTM C1569 – 03(2009) Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)
• ASTM C1570 – 03(2009) Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles(Air Permeability Method)
• ASTM C1571 – 03(2012) Standard Guide for Characterization of Radioactive and/or Hazardous Wastes for Thermal Treatment
• ASTM C1572 – 10 Standard Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities
• ASTM C1574 – 04(2013) Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
• ASTM C1576 – 05(2010) Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
• ASTM C1577 – 13 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
• ASTM C1579 – 13 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
• ASTM C1580 – 09e1 Standard Test Method for Water-Soluble Sulfate in Soil
• ASTM C1581/C1581M – 09a Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
• ASTM C1582/C1582M – 11 Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
• ASTM C1583/C1583M – 13 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
• ASTM C1585 – 13 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
• ASTM C1586 – 05(2011) Standard Guide for Quality Assurance of Mortars
• ASTM C1587 – 09 Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing
• ASTM C1589/C1589M – 13 Standard Practice for Outdoor Weathering of Construction Seals and Sealants
• ASTM C1590 – 04(2009) Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
• ASTM C1592/C1592M – 09 Standard Guide for Making Quality Nondestructive Assay Measurements
• ASTM C1594 – 11 Standard Specification for Polyimide Rigid Cellular Thermal Insulation
• ASTM C1597M – 04(2009)e1 Standard Specification for Gypsum Wallboard (Hard Metric Sizes)
• ASTM C1600/C1600M – 11 Standard Specification for Rapid Hardening Hydraulic Cement
• ASTM C1601 – 11 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
• ASTM C1602/C1602M – 12 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
• ASTM C1603 – 10 Standard Test Method for Measurement of Solids in Water
• ASTM C1604/C1604M – 05(2012) Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete
• ASTM C1605 – 04(2009) Standard Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry
• ASTM C1606 – 10 Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
• ASTM C1607 – 12 Standard Test Method for Determination of “Microwave Safe for Reheating” for Ceramicware
• ASTM C1608 – 12 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste
• ASTM C1609/C1609M – 12 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
• ASTM C1610/C1610M – 10 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
• ASTM C1611/C1611M – 09be1 Standard Test Method for Slump Flow of Self-Consolidating Concrete
• ASTM C1613 – 10 Standard Specification for Precast Concrete Grease Interceptor Tanks
• ASTM C1614 – 05(2010) Standard Practice for the Determination of 237Np, 232Th, 235U and 238U in Urine by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) and Gamma Ray Spectrometry.
• ASTM C1615 – 10 Standard Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities
• ASTM C1616 – 07(2012) Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
• ASTM C1617 – 09 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
• ASTM C1618M – 05(2013) Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric)
• ASTM C1618 – 05(2013) Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure
• ASTM C1619 – 11 Standard Specification for Elastomeric Seals for Joining Concrete Structures
• ASTM C1620 – 12 Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
• ASTM C1621/C1621M – 09b Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
• ASTM C1622/C1622M – 10 Standard Specification for Cold-Weather Admixture Systems
• ASTM C1623 – 11 Standard Specification for Manufactured Concrete Masonry Lintels
• ASTM C1624 – 05(2010) Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
• ASTM C1625 – 12 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
• ASTM C1628 – 11 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
• ASTM C1629/C1629M – 06(2011) Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels
• ASTM C1630 – 11 Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
• ASTM C1634 – 11 Standard Specification for Concrete Facing Brick
• ASTM C1635 – 06 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
• ASTM C1636 – 13 Standard Guide for the Determination of Uranium-232 in Uranium Hexafluoride
• ASTM C1637 – 13 Standard Test Method for the Determination of Impurities in Plutonium Metal: Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis
• ASTM C1638 – 06(2013) Standard Guide for the Determination of Iodine-129 In Uranium Oxide
• ASTM C1639 – 10a Standard Specification for Fabrication of Cellular Glass Pipe and Tubing Insulation
• ASTM C1642 – 07 Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
• ASTM C1643 – 08 Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
• ASTM C1644 – 06(2011) Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
• ASTM C1645/C1645M – 11 Standard Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
• ASTM C1646/C1646M – 08a Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
• ASTM C1647 – 13 Standard Practice for Removal of Uranium or Plutonium, or both, for Impurity Assay in Uranium or Plutonium Materials
• ASTM C1648 – 12 Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass
• ASTM C1649 – 08 Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated
• ASTM C1650 – 07 Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated
• ASTM C1651 – 11 Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass
• ASTM C1652/C1652M – 06 Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids
• ASTM C1655 – 06(2011) Standard Classification of Fireclay and High-Alumina Mortars
• ASTM C1656 – 13 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
• ASTM C1658/C1658M – 12 Standard Specification for Glass Mat Gypsum Panels
• ASTM C1660 – 10 Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry
• ASTM C1661 – 13 Standard Guide for Viewing Systems for Remotely Operated Facilities
• ASTM C1662 – 10 Standard Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method
• ASTM C1663 – 09 Standard Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test
• ASTM C1666/C1666M – 08 Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
• ASTM C1667 – 09 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
• ASTM C1668 – 13 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
• ASTM C1671 – 07 Standard Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging
• ASTM C1672 – 07 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
• ASTM C1673 – 10ae1 Standard Terminology of C26.10 Nondestructive Assay Methods
• ASTM C1674 – 11 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
• ASTM C1675 – 11 Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
• ASTM C1676 – 08 Standard Specification for Microporous Thermal Insulation
• ASTM C1677 – 11a Standard Specification for Joints for Concrete Box, Using Rubber Gaskets
• ASTM C1678 – 10 Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses
• ASTM C1679 – 09 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
• ASTM C1681 – 09 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
• ASTM C1682 – 09 Standard Guide for Characterization of Spent Nuclear Fuel in Support of Geologic Repository Disposal
• ASTM C1683 – 10 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
• ASTM C1684 – 08 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature-Cylindrical Rod Strength
• ASTM C1685 – 08 Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications
• ASTM C1686 – 09 Standard Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units
• ASTM C1688/C1688M – 13 Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete
• ASTM C1689 – 08a Standard Practice for Subsampling of Uranium Hexafluoride
• ASTM C1691 – 11 Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
• ASTM C1692 – 11 Standard Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry
• ASTM C1693 – 11 Standard Specification for Autoclaved Aerated Concrete (AAC)
• ASTM C1694 – 09 Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements
• ASTM C1695 – 10 Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service
• ASTM C1696 – 13a Standard Guide for Industrial Thermal Insulation Systems
• ASTM C1697 – 10 Standard Specification for Blended Supplementary Cementitious Materials
• ASTM C1698 – 09 Standard Test Method for Autogenous Strain of Cement Paste and Mortar
• ASTM C1699 – 09 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
• ASTM C1701/C1701M – 09 Standard Test Method for Infiltration Rate of In Place Pervious Concrete
• ASTM C1702 – 09a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
• ASTM C1703 – 08(2013) Standard Practice for Sampling of Gaseous Uranium Hexafluoride
• ASTM C1704/C1704M – 09a Standard Test Method for Sampling and Testing Structural Cementitious Panels
• ASTM C1705/C1705M – 09 Standard Specification for Structural Cementitious Panels
• ASTM C1707 – 11 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes
• ASTM C1708 – 12 Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements
• ASTM C1709 – 11 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete
• ASTM C1710 – 11 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
• ASTM C1712 – 09 Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test
• ASTM C1713 – 12 Standard Specification for Mortars for the Repair of Historic Masonry
• ASTM C1714/C1714M – 13 Standard Specification for Preblended Dry Mortar Mix for Unit Masonry
• ASTM C1715 – 10 Standard Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems
• ASTM C1716/C1716M – 12 Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
• ASTM C1717 – 12 Standard Test Methods for Conducting Strength Tests of Masonry Wall Panels
• ASTM C1718 – 10 Standard Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning
• ASTM C1719 – 11 Standard Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill
• ASTM C1720 – 11 Standard Test Method for Determining Liquidus Temperature of Immobilized Waste Glasses and Simulated Waste Glasses
• ASTM C1721 – 09 Standard Guide for Petrographic Examination of Dimension Stone
• ASTM C1722 – 11 Standard Guide for Repair and Restoration of Dimension Stone
• ASTM C1723 – 10 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
• ASTM C1725 – 10 Standard Guide for Hot Cell Specialized Support Equipment and Tools
• ASTM C1726/C1726M – 10 Standard Guide for Use of Modeling for Passive Gamma Measurements
• ASTM C1728 – 13 Standard Specification for Flexible Aerogel Insulation
• ASTM C1729 – 13 Standard Specification for Aluminum Jacketing for Insulation
• ASTM C1731 – 13 Standard Specification for Concrete Floor Tile
• ASTM C1733 – 10 Standard Test Method for Distribution Coefficients of Inorganic Species by the Batch Method
• ASTM C1735 – 11 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
• ASTM C1736 – 11 Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device
• ASTM C1737 – 10 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
• ASTM C1738 – 11a Standard Practice for High-Shear Mixing of Hydraulic Cement Paste
• ASTM C1740 – 10 Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method
• ASTM C1741 – 12 Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout
• ASTM C1742 – 10 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double Standard Single-Collector Gas Mass Spectrometer Method
• ASTM C1743 – 12 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction
• ASTM C1744 – 12 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction
• ASTM C1745/C1745M – 11 Standard Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
• ASTM C1746/C1746M – 12 Standard Test Method for Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices
• ASTM C1747/C1747M – 11 Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion
• ASTM C1749 – 12 Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
• ASTM C1750 – 11 Standard Guide for Development, Verification, Validation, and Documentation of Simulated High-Level Tank Waste
• ASTM C1751 – 11 Standard Guide for Sampling Radioactive Tank Waste
• ASTM C1752 – 11 Standard Guide for Measuring Physical and Rheological Properties of Radioactive Solutions, Slurries, and Sludges
• ASTM C1754/C1754M – 12 Standard Test Method for Density and Void Content of Hardened Pervious Concrete
• ASTM C1756 – 11 Standard Guide for Comparing Sealant Behavior to Reference Photographs
• ASTM C1758/C1758M – 11 Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete
• ASTM C1760 – 12 Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete
• ASTM C1761/C1761M – 12 Standard Specification for Lightweight Aggregate for Internal Curing of Concrete
• ASTM C1767 – 13 Standard Specification for Stainless Steel Jacketing for Insulation
• ASTM C1768/C1768M – 12 Standard Practice for Accelerated Curing of Concrete Cylinders
• ASTM C1770 – 13 Standard Test Method for Determination of Loose and Tapped Bulk Density of Plutonium Oxide
• ASTM C1771 – 13 Standard Test Method for Determination of Boron, Silicon, and Technetium in Hydrolyzed Uranium Hexafluoride by Inductively Coupled Plasma—Mass Spectrometer After Removal of Uranium by Solid Phase Extraction
• ASTM C1773 – 13 Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature